Collecting every piece of gear takes a little time.
We think it's worth the wait.

Nice choice!
Give us a moment to collect those options for you.

Petzl Pantin® Left Ascender

Pantin® Left

Rating

My vote: None ( 6 avg )

Description

PANTIN is a foot ascender designed for more efficient and less tiring rope ascents, also available in a left-foot version.

  • Facilitates rope ascents:
    - Used to complement CROLL, ASCENSION, or BASIC ascenders
    - Keeps the body upright for more efficient movement
    - Design facilitates rope glide during the first few meters
  • Great durability:
    - Stainless steel cam offers excellent corrosion resistance
    - Toothed cam with self-cleaning slot optimizes performance under a variety of conditions (such as frozen or dirty ropes)
    - HMPE (high-modulus polyethylene) straps resist abrasion
  • Functional and ergonomic:
    - Compact shape allows it to remain constantly attached to the foot and prevents risk of snagging
    - Quick and easy to adjust with DOUBLEBACK buckle
    - Releases from the rope with a simple backwards movement of the foot
    - Catch available as accessory to keep the rope in the device during rope ascents
  • Note: The PANTIN is not an item of PPE.
  • Material(s): Aluminum, stainless steel, high-modulus polyethylene

Retail price

US$ 79.95

When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!

Weight (g) 85 g
Ascender Type

Ascender Type


Hand

Hand ascenders are used to manually ascend rope by pulling down with hands. They always have handles and are typically made in left and right hand versions.


Chest/Compact/Basic

Chest, Compact and Basic ascenders are often used in conjunction with other rigging or devices for ascending rope or progress capture. Their shape is made to be pulled down on and they have lower holes for attachment, though they aren’t as comfortable to use as hand ascenders. The upper holes also allow them to be used as a trailing backup.


Backup/Rope Grab

Backup or Rope Grab ascenders are used as emergency backups and efficiency devices in hauling situations. They are usually trailed behind a climber via a sling when ascending a fixed line, or to give mechanical hold on a rope when pulling on a weighted line.


Foot

Foot ascenders allow direct attachment of the foot to a rope and are most often used in arboriculture and work at height situations where the only thing to climb is a rope. They typically do not have holes for attachment of carabiners and do not function as safety backups.

Foot
Tooth Type

Tooth Type

Toothed

The teeth on toothed ascenders are usually conical and sharp. They are designed to physically bite into the sheath of the rope. Toothed ascenders are the most common for devices made to climb rope.


Ridged

Ridged tooth ascenders clamp on the rope with flat, jagged teeth that are the width of the device. The teeth do not bite into the rope sheath but rather clamp it with the force of the triangular shape of the teeth. Ridged teeth are usually seen on backup ascenders but do also appear on foot, chest and pulley capture devices.


Smooth

Very few toothless ascenders exist but some manufacturers tout toothless as a benefit of reducing wear on ropes. This style is mostly found on rope clamp/hauling devices.

Toothed
Bottom Holes

Bottom Holes

Bottom Holes

Manufacturers provide holes for attaching carabiners and equipment to the bottom of ascenders. Some of these are made to accept one or more carabiners, while others are designed to accept one carabiner and a quick link (or maillon) for semi-permanently attaching a loop or ladder. Usually only ascenders made to operate attached to or above a climber have lower attachment holes. This option only applies to devices with both Upper and Lower holes.


Not applicable for this ascender type
Handedness

Handedness

Hands

Hand ascenders are made with handles designed to be held and operated by the left or the right hand, however there are a few that have 2 handles designed to be used by both hands.


Feet

Foot Ascenders are usually made to attach to a specific foot, left or right, or may be either/or.


Other

Most other types tend to not have a preference for handling or are not made to be pulled on without additional carabiners, ladders or materials and are considered both left and right handed.

Left
Features

Features

Certified Pulley

Some rope grab devices function as a weight certified pulley when hung from an anchor in a hauling situation. These pulleys ease efficiency and movement of the rope when under load but in order to be safely used to haul large weights and humans, these devices must pass extra certification (EN 12278/UIAA). Note: Not all devices with rolling surfaces/pulleys have been certified to be used as a pulley. Certified Pulleys should not be confused with Built-in Rollers which are not rated to hold weight.

Integrated Belay

These ascenders have a built in single slot for passing the rope through which allows the ascender to be used as a belay device in a controlled descent on a single rope. While designed to allow a climber to transition from ascending to descending on the same rope, this feature can also be used to lower out a climber or load and could technically be used to belay in a pinch.


Built-in Roller

A built-in roller can be helpful when working at height or ascending a rope with a progress capture device. It can help to add efficiency and give mechanical advantage by redirecting the rope above the climber. This can also be helpful during hauling situations where continual dropping and lifting of a climber’s weight is necessary. These rollers are not rated as a piece of PPE and should not be confused with Certified Pulleys which are tested to hold a climber’s weight or heavier loads.


Mid Attachment Hole

A middle hole that a carabiner can fit through. This is particularly helpful for higher placement of a carabiner pulley setup.


Works on Webbing

Some ridged toothed ascenders are designed to be used on flat webbing as well as ropes. Their intent is not necessarily for vertically scaling webbing, but rather for clamping backups and positioning along webbing, which can be particularly useful during rescue and work at height situations.

Not applicable
Rope Range

Rope Range

Certified Devices

All ascenders and rope grab devices that have been certified by the EN or UIAA are required to list a rope range. This range is not a specification of the test, but rather the cert is an acknowledgement of the device functioning correctly with that size rope. Essentially, a manufacturer can seek to certify a device to work with any size of rope they want, and if it passes the certification at that size then they are required to print it on the device.

The most common rope ranges tested for EN567 are in the 8-13mm range.

The most common ranges for EN 12841A/B are 10-13mm.


Non-certified Devices

Devices that carry no certification may or may not have specified rope ranges. Foot ascenders and other rope grabs that are not made to be used as PPE (Personal Protective Equipment) do not have a standard operating range of rope sizes and should be looked at more closely to determine the manufacturers recommendation for their use.

Rope ranges for these devices can vary wildly but are often in the 10-13mm range.

8 - 13mm
Certification

Certification

EN 567:2013 (UIAA 126)

This is a static certification. It denotes a static holding power of 4kN and does NOT include testing the device to arrest a fall of any kind. EN 567 is described as a rope clamp device and is tested ONLY to be used to capture progress in one direction on a rope or webbing.


EN 12841:2006

This is a certification in three types: A, B & C.

12841:A (12841/A) is certified and tested to hold a static pull of up to 15kN AND a dynamic fall up to 6kN.
12841:B (12841/B) is certified and tested to hold a static pull of 4kN and must catch and hold 100kg then be pulled and held at 3kN without failing.
12841:C is a rating for descending devices and does not apply here.


EN 12278:2017 (UIAA 127)

This certification applies only to devices with pulleys. It certifies that the pulley itself rolls correctly under a load of 2kN and does not fail at or below a load of 15kN.


Uses

In general, EN 567 can be thought of as progress capture and a safety backup in static situations, such as being trailed along a fixed line. When used for safety in a more dynamic situation like toprope soloing, they should always be used with backup devices which are certified to catch a dynamic load such as a device with the 12841:A certification.

Devices that are 12841:B are more complicated. While they are tested to catch a dynamic load they are not tested to ensure that force doesn't exceed 6kN, which means they may lock in a way that transmits a greater amount of force from a fall to the anchor. Since their holding power is not tested beyond 3kN after this fall arrest, they should never be relied upon as the sole safety device to catch a fall.

Devices with pulleys rated EN 12278 or UIAA are most often capture pulleys meant to be utilized as hauling devices. The certification denotes that they are safe for heavy loads like multiple humans and haulbags which are often much more than 100kg (220 pounds). If an ascender has a roller and does not have this cert, it has not been tested to hold this much weight so extreme caution should be used when utilizing it in this fashion.


It is important to note that devices often have multiple certifications. For example a device may be tested to hold EN 567 forces AND be certified to pass the 12841:A standard. If purchasing any devices in the ascender category we highly recommend understanding ALL of your needs and the forces they can generate and being aware of a device's limitations before trusting your or someone else’s life to it.

Note: We only include current standards. This means certifications like EN 567:1997 (year 1997 vs year 2013) are outdated and not included.

Not Certified
AVG RATING
5.04
( 5 avg )
Rating
5.04
( 5 avg )

Invisible Stairs

Pros
Everything
Familiarity
I’ve used it a few of times
Disclaimer
Not safety gear

I forget that I have this on since its so light and compact. Makes ascending a breeze when your foot stays in line with the rope. Also keeps the clutter down without the need of a second aider. 
 

I forget that I have this on since its so light and compact. Makes ascending a breeze when your foot stays in line with the rope. Also keeps the clutter down without the need of a second aider. 
 

The bite is strong as with all Petzl ascenders. The spring action is light enough for running up the rope without too much effort. Easy attach and retach. 
 

 

Rating
5.04
( 5 avg )

Ascending fixed ropes frequently? You're not living unless you pantin.

Pros
Very compact and lightweight design
No cam lock (default), but available as add-on
Easy to disconnect from rope
Easy to put onto boot
Rope feeds very smoothly
Comes in black
Very secure foot straps
Cons
Shell wears out before teeth
Easy to lose
Left-footed pantin'ing may cause premature wear on Croll shell
Familiarity
I’ve used it a ton
Disclaimer
Caving (Southeastern, USA)

If you're climbing fixed ropes regularly, especially with a frog system, your life becomes absolutely glorious the day you invest in a pantin.

The #1 killer of pantins is losing them after you take it off, so be careful that you don't drop it out of your pack or it fall off your harness gear loop!

The pantin shell will almost certainly wear out faster than the teeth. I wish that Petzl used a wear plate or something to help prevent that....

As a side note: frogging with a left foot croll pulls the rope leftward against the shell of the croll, which may cause the shell to be worn-out slightly faster than if using the right foot. This would only be seen after nearly a dozen *miles* of rope climbing on muddy caving ropes, so it is not decreasing the croll's lifespan for the average aboveground user. However, it is worth mentioning.

Pantin Foot Ascender Review