Collecting every piece of gear takes a little time.
We think it's worth the wait.

Nice choice!
Give us a moment to collect those options for you.

Wild Country Syncro Harness
  • Wild Country Syncro Harness
  • Wild Country Syncro Harness

Syncro

Rating

My vote: None ( 5.8 avg )

Description

We took the best elements of the old Syncro, our fullyfeatured big capacity multi-pitch harness, and then went back to the drawing board. The result is a completely new construction that offers superior versatility, comfort, support and ventilation with maximum gear carrying capacity for long lines and big wall projects – and all at a reasonable weight. Made with a super comfortable padding, and matched with robust, abrasion-resistant Ripstop covering, the Syncro offers a proven combination of durability, flexibility and weight distribution for hanging belays and long days without uncomfortable pressure points. We also give the reinforced lower tie-in point a wear indicator. It has red threads that only become visible after excessive wear and abrasion, to show when it is time to replace the harness. A further important standout feature is the ventilated Air Mesh zone for increased breathability in the lumbar region.
The two beefy slide block buckles on the 25 mm webbing waistbelt and on the 20mm webbing leg loops can be fully opened to make the harness easier to put on when wearing skis or crampons. For each of the four buckles you get elastic strap retainers to prevent loose ends. 

The Syncro features a total of six gear loops with two rigid front loops and four softer loops at the back for multiple racking options and uncluttered organisation. The gear loops are also specifically designed for easy gear retrieval and its twin buckles at the waist allow you to keep everything centred, no matter how many layers you’re wearing. And there are two slots for carrying tool or ice screw holders and a decent-sized rear haul loop too.

  • Maximum comfort when hanging: well-cushioned, broad waistbelt distributes load over entire surface area
  • Engineered for balanced weight distribution and maximum stability, no matter how big your rack
  • Ergonomically-shaped, adjustable leg loops and waistbelt remain comfortable while moving
  • Dual slide block, aluminium waist buckles allow tie-in point to be centred and equalize gear loops
  • Dual slide block, aluminium leg buckles for full adjustment, including over winter layers
  • Ventilated Air Mesh zone for increased breathability at the lumbar region

Retail price

US$ 129.95

When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!

Weight (g)

Weight

In grams, the weight, as stated by the manufacturer/brand.

If there are differences in weight (due to multiple sizes or optional accessories) we'll list them here.

The default weight is the middle-most size, often this is size M.

560 g

S/M: 585 g / 20.6 oz
L/XL: 615 g / 21.7 oz
(weight converted from grams to ounces)

Fit Unisex
Sizes XS, S, M, L, XL, XXL
Gear Loops

Number of Gear Loops

Gear loops are used to hold gear (quickdraws, cams, etc) onto your harness. 4 gear loops is most common.

0 - 1 Gear Loops

Most often on full body harnesses or guide/gym style harnesses.

2-3 Gear Loops

Mostly found on lighter harnesses made for [ski] mountaineering or high-end sport climbing where weight is a high priority.

4 - 5 Gear Loops

The standard/most common number for climbing harnesses. Perfect for sport and trad.

More Than 6 Gear Loops

Designed for long multi-pitch and big wall climbing, found on harnesses made to hold the maximum amount of gear.

Worth Considering

Occasionally, the number of gear loops will change on a harness model depending on the size. There could be 7 gear loops for the med/large but only 5 gear loops for the xsmall/small. In this case we list the highest number for the filters, and then write an explanation on the product page like, “Size S/XS can only fit 5 gear loops.”

6 Gear loops
Ice Clip Slots

Ice Clip Slot

Ice clipper slots are made to fit a carabiner that holds ice screws. These slots are generally only used by ice climbers but there is no disadvantage to having them on your harness.

Less than 40% of harnesses will have ice clipper slots. And those harnesses will usually have 2 or 4 slots, often located next to, or between, the gear loops.

Yes, 2
Belay / Tie-In One Loop
Waist Buckle Type Quick Adjust
Leg Buckle Type Quick Adjust
Drop Seat Yes
Haul Loop

Haul Loop

Trad climbers often look for a haul loop as they're intended to haul a rope (second line) or pack (while you climb the chimney).

A haul loop can also hold shoes or other accessories. Although not the intended use, it is also commonly used to hold a chalk bag.

Yes  (0kN)
Certification CE, EN
Size Chart

S/M (will fit the upper range of XS)
Waist: 67-87.5 cm / 26.4-34.4 in
Legs: 45-60 cm / 17.7-23.6 in
L/XL (will fit the lower range of XXL)
Waist: 83-102.5 cm / 32.7-40.4 in
Legs: 55-70 cm / 21.7-27.5 in
(we converted centimeters to inches)

No reviews yet.

If you know of a good product video that should be here, let us know, and we'll put it up.

If you're looking for gear videos in general, check out our Vimeo and YouTube channels to see the newest gear.

The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.