B360a

Weight

In grams, the weight, as stated by the manufacturer/brand.

If there are differences in weight (due to multiple sizes or optional accessories) we'll list them here.

The default weight is the middle-most size, often this is size M.

Number of Gear Loops

Gear loops are used to hold gear (quickdraws, cams, etc) onto your harness. 4 gear loops is most common.

0 - 1 Gear Loops

Most often on full body harnesses or guide/gym style harnesses.

2-3 Gear Loops

Mostly found on lighter harnesses made for [ski] mountaineering or high-end sport climbing where weight is a high priority.

4 - 5 Gear Loops

The standard/most common number for climbing harnesses. Perfect for sport and trad.

More Than 6 Gear Loops

Designed for long multi-pitch and big wall climbing, found on harnesses made to hold the maximum amount of gear.

Worth Considering

Occasionally, the number of gear loops will change on a harness model depending on the size. There could be 7 gear loops for the med/large but only 5 gear loops for the xsmall/small. In this case we list the highest number for the filters, and then write an explanation on the product page like, “Size S/XS can only fit 5 gear loops.”

Ice Clip Slot

Ice clipper slots are made to fit a carabiner that holds ice screws. These slots are generally only used by ice climbers but there is no disadvantage to having them on your harness.

Less than 40% of harnesses will have ice clipper slots. And those harnesses will usually have 2 or 4 slots, often located next to, or between, the gear loops.

Haul Loop

Trad climbers often look for a haul loop as they're intended to haul a rope (second line) or pack (while you climb the chimney).

A haul loop can also hold shoes or other accessories. Although not the intended use, it is also commonly used to hold a chalk bag.