How to use Trango Harness, maintenance and lifespan with instructional pictures.
Prism
Description
The Prism is a well balanced harness, providing a comfortable fit to a wide range of climbers. Featuring floating waist band technology to keep the fit symmetrical no matter the adjustment of the waist band.
- Floating waist band for symmetrical fit at any adjustment level
- Gear loops designed for quick access
Retail price
When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!
Weight (g)WeightIn grams, the weight, as stated by the manufacturer/brand. If there are differences in weight (due to multiple sizes or optional accessories) we'll list them here. The default weight is the middle-most size, often this is size M. | 288 g |
Fit | Unisex |
Sizes | S, M, L, XL, XXL |
Gear LoopsNumber of Gear LoopsGear loops are used to hold gear (quickdraws, cams, etc) onto your harness. 4 gear loops is most common. 0 - 1 Gear LoopsMost often on full body harnesses or guide/gym style harnesses. 2-3 Gear LoopsMostly found on lighter harnesses made for [ski] mountaineering or high-end sport climbing where weight is a high priority. 4 - 5 Gear LoopsThe standard/most common number for climbing harnesses. Perfect for sport and trad. More Than 6 Gear LoopsDesigned for long multi-pitch and big wall climbing, found on harnesses made to hold the maximum amount of gear. Worth ConsideringOccasionally, the number of gear loops will change on a harness model depending on the size. There could be 7 gear loops for the med/large but only 5 gear loops for the xsmall/small. In this case we list the highest number for the filters, and then write an explanation on the product page like, “Size S/XS can only fit 5 gear loops.” | 4 Gear loops |
Ice Clip SlotsIce Clip SlotIce clipper slots are made to fit a carabiner that holds ice screws. These slots are generally only used by ice climbers but there is no disadvantage to having them on your harness. Less than 40% of harnesses will have ice clipper slots. And those harnesses will usually have 2 or 4 slots, often located next to, or between, the gear loops. | No, 0 |
Belay / Tie-In | One Loop |
Waist Buckle Type | Quick Adjust |
Leg Buckle Type | None (it stretches) |
Drop Seat | No |
Haul LoopHaul LoopTrad climbers often look for a haul loop as they're intended to haul a rope (second line) or pack (while you climb the chimney). A haul loop can also hold shoes or other accessories. Although not the intended use, it is also commonly used to hold a chalk bag. | Yes (0kN) |
Certification | |
Size Chart | S (will fit the upper range of XS)
Waist : 69-79 cm / 27-31 in M
Waist : 76-89 cm / 30-34 in L (will fit most XL and the lower range of XXL)
Waist : 86-99 cm / 33-37 in (we converted inches to centimeters) |
No reviews yet.
With that note out of the way, the Trango Prism harness did not disappoint. It’s comfy—the waist belt and leg loops distribute weight well, and, being constructed with a padded mesh lining, they breathe. More importantly, the harness has held up nicely through the four-month season I’ve thus far put it through, which has included outdoor climbing almost every weekend and a few weekday outings as well. This harness has seen some whips! There’s currently only slight wear on the bottom tie-in point, which is totally normal for the mileage.
A pictoral representation of UIAA-105 and EN-12277 standards for harnesses.
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.