High-end climbing harness providing maximum comfort, low weight and freedom of movement. Designed for sport routes or wherever you want to climb light.
- flexible leg loops with elastic straps adapt to the user´s legs
- one patented Rock&Lock buckle on the waist belt made of stainless steel to increase corrosion resistance
- flat profile of the harness guarantees unlimited movement
- for both the leg loops and the waist belt the variable width webbing is used - this ergonomic construction combines maximum comfort and low weight
- new webbing is more durable, works better in our Rock&Lock buckle and makes tightening smoother
- padded waist belt and the leg loops are made from EVA foam and breathable PES fabric with high abrasion resistance
- fixed bridge between the leg loops provides greater safety in a case of incorrect tie-in
- 4 ergonomic braided gear loops are shaped to facilitate handling and to provide enough space for your climbing gear
- rear haul loop with a load capacity of 30 kg
- 12 mm belay loop for proper tie-in/attachment point, strength 15 kN
- BMI adjusting system ensures the perfect fit when changing layers or weight
- fresh and simple design will win favor with you and your buddies as well
When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!
In grams, the weight, as stated by the manufacturer/brand.
If there are differences in weight (due to multiple sizes or optional accessories) we'll list them here.
The default weight is the middle-most size, often this is size M.
| 335 g|
M : 335 g / 11.8 oz
|Sizes||XS, S, M, L, XL|
Number of Gear Loops
Gear loops are used to hold gear (quickdraws, cams, etc) onto your harness. 4 gear loops is most common.
0 - 1 Gear Loops
Most often on full body harnesses or guide/gym style harnesses.
2-3 Gear Loops
Mostly found on lighter harnesses made for [ski] mountaineering or high-end sport climbing where weight is a high priority.
4 - 5 Gear Loops
The standard/most common number for climbing harnesses. Perfect for sport and trad.
More Than 6 Gear Loops
Designed for long multi-pitch and big wall climbing, found on harnesses made to hold the maximum amount of gear.
Occasionally, the number of gear loops will change on a harness model depending on the size. There could be 7 gear loops for the med/large but only 5 gear loops for the xsmall/small. In this case we list the highest number for the filters, and then write an explanation on the product page like, “Size S/XS can only fit 5 gear loops.”
|4 Gear loops|
|Ice Clip Slots|
Ice Clip Slot
Ice clipper slots are made to fit a carabiner that holds ice screws. These slots are generally only used by ice climbers but there is no disadvantage to having them on your harness.
Less than 40% of harnesses will have ice clipper slots. And those harnesses will usually have 2 or 4 slots, often located next to, or between, the gear loops.
|Belay / Tie-In||One Loop|
|Waist Buckle Type||Quick Adjust|
|Leg Buckle Type||None (it stretches)|
Trad climbers often look for a haul loop as they're intended to haul a rope (second line) or pack (while you climb the chimney).
A haul loop can also hold shoes or other accessories. Although not the intended use, it is also commonly used to hold a chalk bag.
|Certification||CE, EN, UIAA|
|Size Chart|| |