Sizing Chart for all Mens, Womens, and Childrens Harnesses
Moe 3R
Description
The MOE 3R is the first sport climbing harness to be almost exclusively made from recycled materials. With the exception of the Dyneema® central ring and the parallel tie-in points for extra strength and abrasion resistance plus the elasticated leg loop straps and the Slide Block buckle, all components are recycled. To make the recycled material content as high as possible, a special polyester fleece is used as carrier material instead of foam. The butterfly shape of the waist belt optimally distributes loads and enhances hanging comfort.
- Easy Glider buckle for easy and secure fitting
- Outer fabric made from bluesign®-certified materials
- All textile materials made of polyester are recycled, including the padding
- Single-origin polyester in all textiles for simple reintegration into the recycling process
- Four symmetrical gear loops and two attachment options for ice screw clips
- Central loop with a kernmantle construction
Retail price
US$ 69.95
When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!
Weight (g) WeightIn grams, the weight, as stated by the manufacturer/brand. If there are differences in weight (due to multiple sizes or optional accessories) we'll list them here. The default weight is the middle-most size, often this is size M. | 326 g S : 352 g / 12.4 oz |
| Fit | Unisex |
| Sizes | XS, S, M, L, XL |
Gear LoopsNumber of Gear LoopsGear loops are used to hold gear (quickdraws, cams, etc) onto your harness. 4 gear loops is most common. 
0 - 1 Gear LoopsMost often on full body harnesses or guide/gym style harnesses. 2-3 Gear LoopsMostly found on lighter harnesses made for [ski] mountaineering or high-end sport climbing where weight is a high priority. 4 - 5 Gear LoopsThe standard/most common number for climbing harnesses. Perfect for sport and trad. More Than 6 Gear LoopsDesigned for long multi-pitch and big wall climbing, found on harnesses made to hold the maximum amount of gear. Worth ConsideringOccasionally, the number of gear loops will change on a harness model depending on the size. There could be 7 gear loops for the med/large but only 5 gear loops for the xsmall/small. In this case we list the highest number for the filters, and then write an explanation on the product page like, “Size S/XS can only fit 5 gear loops.” | 4 Gear loops |
Ice Clip SlotsIce Clip SlotIce clipper slots are made to fit a carabiner that holds ice screws. These slots are generally only used by ice climbers but there is no disadvantage to having them on your harness. 
Less than 40% of harnesses will have ice clipper slots. And those harnesses will usually have 2 or 4 slots, often located next to, or between, the gear loops. | Yes, 2 |
| Belay / Tie-In | One Loop |
| Waist Buckle Type | Quick Adjust |
| Leg Buckle Type | None (it stretches) |
| Drop Seat | Yes |
Haul LoopHaul LoopTrad climbers often look for a haul loop as they're intended to haul a rope (second line) or pack (while you climb the chimney). 
A haul loop can also hold shoes or other accessories. Although not the intended use, it is also commonly used to hold a chalk bag. | Yes (0kN) |
| Certification | EN |
| Size Chart | S (will fit the upper range of XS)
Waist : 68-83 cm / 26.7-32.6 in Legs : 51-56 cm / 20-22 in M Waist : 75-90 cm / 29.5-35.4 in Legs : 54-59 cm / 21.2-23.2 in L (will fit the lower range of XXL) Waist : 82-97 cm / 32.2-38.1 in Legs : 59-64 cm / 23.2-25.1 in (we converted centimeters to inches) |
No reviews yet.
Overall, I am excited about Edelrid’s new environmentally-friendly climbing harness. It performs as expected while rock climbing and is exceptionally durable even though it is made from recycled materials. In the future, I would like to see a slightly less bulky fit and some adjustable leg straps to customize the fit of the harness for all body types. However, with that all being said, I will definitely keep this harness in my climbing bag!
So far, besides dirt, there is no visible wear, but I've only been using the Moe 3R for about the last seven weeks, in which time I've done about 20 routes outside in it, and probably a similar number at the climbing wall. I've noted above that the Edelrid Sendero has been one of my favourite ever harnesses, but it has also worn more than any other harness I have used. None of that wear has been in safety critical areas, but more the material they chose for wrapping the waist belt and leg loop padding seemed rather vulnerable to abrasion and a number of holes or rips have been the result. The polyester used for this purpose on the Moe 3R feels a bit tougher - a bit rougher and not as soft, closer to a Cordura type material than the softer fabric on the Sendero, and so far that seems a better choice with no signs of wear. But it's early days, I'll keep an eye on it and update the review at a later point.
If you know of a good product video that should be here, let us know, and we'll put it up.
If you're looking for gear videos in general, check out our Vimeo and YouTube channels to see the newest gear.
How to use Edelrid Harness, safety, lifespan, storage and care with instructional pictures.
A pictoral representation of UIAA-105 and EN-12277 standards for harnesses.
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.