Collecting every piece of gear takes a little time.
We think it's worth the wait.

Nice choice!
Give us a moment to collect those options for you.

Petzl GriGri Belay Device
  • Petzl GriGri Belay Device
  • Petzl GriGri Belay Device
  • Petzl GriGri Belay Device
  • Petzl GriGri Belay Device
  • Petzl GriGri Belay Device
  • Petzl GriGri Belay Device

GriGri

Petzl

Rating

My vote: None ( 6 avg )

Description

Designed for the experienced belayer, the GRIGRI is a belay device with assisted braking designed for belaying both in the gym and at the crag. Compact and lightweight, it can be used with single ropes from 8.5 to 11 mm. The assisted braking function improves comfort while belaying, holding a climber or catching a fall. The design of the handled camming mechanism enables exceptional descent control.

  • Belay device with assisted braking, compatible with a broad range of single rope diameters, for both gym and crag:
    - feeding slack and catching falls are done using standard belay techniques; always keep a hand on the brake-side of the rope.
    - the assisted braking function is activated when a climber falls, the device pivots, the rope tightens and the cam pinches and blocks the rope. Holding the brake side of the rope helps engage the cam, therefore it is important to always hold the brake side of the rope.
    - compatible with dynamic single ropes 8.5 to 11 mm, optimized for 8.9 to 10.5 mm.
    - rope installation diagram engraved on both the interior and exterior of the device.
  • Exceptional comfort during descents:
    - the ergonomic handle allows you to easily lower someone.
    - smooth descent control is achieved thanks to the progressive action of the cam.
  • Designed for experienced belayers: 
    - simple to use for belaying both lead or top-rope climbers.

Retail price

US$ 110.00

When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!

Award Image
Device Type

Device Type

Tube

The most commonly used belay type also called an “ATC” or “tuber.” Other than a distinction between other belay device types, “Tube” is a rarely used term, most climbers just assume you're talking about this style when they refer to your "belay device."

Tube belay device example

Figure 8

Mostly used in rescue, canyoneering, tactical, work safety, or by old school climbers and rappellers. One reason they went out of popularity with recreational climbers is because they tend to create twists in the rope.

Figure 8 belay device example

Brake Assist

These devices assist in stopping the rope when a climber falls or hangs on the rope.

Brake Assist belay device example

Often referred to as “auto-blocking” but that’s not the official terminology because no belay device should be assumed to work automatically by itself, even if it feels like it does (or does most the time).

Plate

When simplicity is a must, or you started climbing before Tubers were the norm. Bonus: They tend to be very light weight.

Plate belay device example

Descender

For rappelling, not for belaying a lead climber or top-roping.

Descender example
Brake Assist
Weight (g)

Weight (g)

In grams, the weight, as stated by the manufacturer/brand.

175 g
Guide Mode

Guide Mode

This is when you belay directly off the anchor instead of your harness. Guide mode is helpful if you climb outdoors a lot because it reduces the holding power required from the belayer. When your partner falls or rests, the weight of the climber is held mostly by the anchor and the belay device.

Tubers and Plates

When belaying in "guide mode," the tubers and plates turn auto-blocking. During a fall, the climbing rope pinches the slack rope, completely stopping the movement of either rope. A common guide mode setup shown below.

A double rope tubular device guide mode example

Mechanical Brake Assist Devices

There is no difference in the functionality of the device. A brake-hand should always be on the rope to ensure the climber is caught in the case of a fall. A common guide mode setup shown below.

A single rope mechanical brake assist guide mode example

Where guide mode is used

  • multi-pitch sport or trad climbs
  • single-pitch where you need to bring up a follower (say for a walk-off)

Learn More

http://www.climbing.com/skill/essential-skills-auto-blocking-belay-devices/

1 follower only
Teeth

Teeth

Teeth are only seen on tube devices. They add friction that helps grip the rope for more belaying control.

This is helpful for belaying heavier climbers. Teeth are becoming standard on new tube devices.

The belay device teeth are shown in the red circle

Worth Considering

Teeth do wear out. You can limit wear by rappelling on the side without teeth (if you don’t need the extra friction). Once they’re worn, you’ll still have a usable belay device, just less friction.

No
Belay Brake Assist

Belay Brake Assist

This is when the belay device significantly reduces the amount of holding power the belayer must exert to stop a fall and hold a climber.

This is also called "assisted-braking" as the device must hold a significant amount of the climber’s weight; this term does not include friction-adding "teeth" found on some tube style belay devices.

Confusingly referred to as “auto-blocking” or “auto-locking” these terms wrongly imply the device will always, automatically, stop a fall or hold a climber even if the belayer/rappeller is hands-free. These devices are not meant to be used without a hand on the braking side of the rope; the belayers/rapppeller brake hand should always be on the brake rope.

Worth Considering

Most of the mechanical brake assist devices only hold a single strand of rope and are not capable of double-strand rappelling (the most common method of rappel).

Yes
Rope Range (mm)

Rope Range (mm)

The range of rope diameters, in millimeters, that the manufacturer/brand specifies can safely be used.

This is the best case scenario and does not necessarily take into consideration that certified ropes have a tolerance of +/- .3 mm.

Recently, manufacturers have started to add an "optimized" rope range -- this is the range that will result in the nicest handling of the belay device.

8.5 mm - 11.0 mm (optimised for 8.9 mm - 10.5 mm)
Single: 8.5 - 11
Certification

Certifications

The main climbing gear certifications are CE and UIAA--and normally the UIAA creates the rules that the CE body also supports. When possible, we try to list all the certifications the product carries.

To sell a climbing product in Europe, the device must be CE certified. There are no official requirements to sell climbing gear in the US. The UIAA certification is a voluntary process.

Learn More

Rock and Ice Certifications Guide
CE, EN, UIAA
Petzl GriGri 2019

No reviews yet.

Outdoor Gear Lab Gear Review rating 5/5

The Petzl GriGri is the best and most popular active assist braking device on the market today. If you are looking to add a little bit of security to your belaying beyond the simple tube, this is the device we would recommend before any other.

Climbing Gear Reviews UK rating 5/5

So, the 2018 updates are useful, the broader range of rope sizes is great and the up-rated cam does make a difference to the smooth action when lowering. The design tweaks on the plate fold over and handle are for aficionados and of course you should read all the documentation, watch the youtube videos and even practice using it if you are new to using a GriGri, and if you are thinking of upgrading from your original one this is well worth the money.