Collecting every piece of gear takes a little time.
We think it's worth the wait.

Nice choice!
Give us a moment to collect those options for you.

Beetle

DMM

Rating

Description

Equally at home on the crag, as it is down the gym, the Beetle is ideally suited to making the transition from indoors to trad climbing outside. The carefully considered internal geometry with its holding power and smooth rope control inspires confident belaying, lowering and abseiling. Suitable for intensive commercial use.

It is compatible with a wide range of rope diameters, from skinny half-ropes to the thicker single ropes used for bottom roping at climbing walls.

For greater and confidence inspiring control over a wide variety of rope diameters when belaying, lowering and abseiling.

It can be flipped 180° for smooth abseiling on thick or low stretch ropes.

Retail price

US$ 17.95

This Product is Hard to Find.

We don’t know where you can buy this item online in the US. We’ll continue to check all the major retailers and will update this page as soon as we find one.

If you know where to find this online in the US, let us know, and we’ll add the link.

Technical specs

Device Type Device Type Tube The most commonly used belay type also called an “ATC” or “tuber.” Other than a distinction between other belay device types, “Tube” is a rarely used term, most climbers just assume you're talking about this style when they refer to your "belay device." Figure 8 Mostly used in rescue, canyoneering, tactical, work safety, or by old school climbers and rappellers. One reason they went out of popularity with recreational climbers is because they tend to create twists in the rope. Brake Assist These devices assist in stopping the rope when a climber falls or hangs on the rope. Often referred to as “auto-blocking” but that’s not the official terminology because no belay device should be assumed to work automatically by itself, even if it feels like it does (or does most the time). Plate When simplicity is a must, or you started climbing before Tubers were the norm. Bonus: They tend to be very light weight. Descender For rappelling, not for belaying a lead climber or top-roping.	Tube
Weight (g) Weight (g) In grams, the weight, as stated by the manufacturer/brand.	54 g
Belay Brake Assist Belay Brake Assist This is when the belay device significantly reduces the amount of holding power the belayer must exert to stop a fall and hold a climber. This is also called "assisted-braking" as the device must hold a significant amount of the climber’s weight; this term does not include friction-adding "teeth" found on some tube style belay devices. Confusingly referred to as “auto-blocking” or “auto-locking” these terms wrongly imply the device will always, automatically, stop a fall or hold a climber even if the belayer/rappeller is hands-free. These devices are not meant to be used without a hand on the braking side of the rope; the belayers/rapppeller brake hand should always be on the brake rope. Worth Considering Most of the mechanical brake assist devices only hold a single strand of rope and are not capable of double-strand rappelling (the most common method of rappel).	No
Rope Options	1 or 2 ropes
Guide Mode Guide Mode This is when you belay directly off the anchor instead of your harness. Guide mode is helpful if you climb outdoors a lot because it reduces the holding power required from the belayer. When your partner falls or rests, the weight of the climber is held mostly by the anchor and the belay device. Tubers and Plates When belaying in "guide mode," the tubers and plates turn auto-blocking. During a fall, the climbing rope pinches the slack rope, completely stopping the movement of either rope. A common guide mode setup shown below. Mechanical Brake Assist Devices There is no difference in the functionality of the device. A brake-hand should always be on the rope to ensure the climber is caught in the case of a fall. A common guide mode setup shown below. Where guide mode is used multi-pitch sport or trad climbs single-pitch where you need to bring up a follower (say for a walk-off) Learn More http://www.climbing.com/skill/essential-skills-auto-blocking-belay-devices/	No guide mode
Teeth Teeth Teeth are only seen on tube devices. They add friction that helps grip the rope for more belaying control. This is helpful for belaying heavier climbers. Teeth are becoming standard on new tube devices. Worth Considering Teeth do wear out. You can limit wear by rappelling on the side without teeth (if you don’t need the extra friction). Once they’re worn, you’ll still have a usable belay device, just less friction.	Yes
Rope Range (mm) Rope Range (mm) The range of rope diameters, in millimeters, that the manufacturer/brand specifies can safely be used. This is the best case scenario and does not necessarily take into consideration that certified ropes have a tolerance of +/- .3 mm. Recently, manufacturers have started to add an "optimized" rope range -- this is the range that will result in the nicest handling of the belay device.	7.3 mm - 11.0 mm single: 8.5 - 11 half/twin: 7.3 - 9.2
Certification Certifications The main climbing gear certifications are CE and UIAA--and normally the UIAA creates the rules that the CE body also supports. When possible, we try to list all the certifications the product carries. To sell a climbing product in Europe, the device must be CE certified. There are no official requirements to sell climbing gear in the US. The UIAA certification is a voluntary process. Learn More Rock and Ice Certifications Guide	EN