A pictoral representation of UIAA-101 and EN-892 standards for ropes.
10mm Power 60m Dry
The best way to define the rope POWER is to compare it with a tool perfectly designed for delicate conditions, classic grain and innovations improving the safety are on the menu of its complete specifications.
|Weight|| 65.0 g/m|
8.598 lbs / 3900 g
|Diameter (millimeters)||10.0 mm|
|Length (meters)||60 m|
|UIAA Falls (Single / Half / Twin)||7 / 00|
|Dynamic Elongation (Single / Half / Twin)||35.0 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||5.5 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||7.50 kN / 0.00 kN / 0.00 kN|
|Dry Treatment||Sheath (aka Everdry)|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)||0 mm|
|Type of Middle Mark||Marking|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.