Collecting every piece of gear takes a little time.
We think it's worth the wait.

Nice choice!
Give us a moment to collect those options for you.

Beal Aero-Park IV
  • Beal Aero-Park IV
  • Beal Aero-Park IV

Aero-Park IV

Rating

no ratings

Description

Specially developed for adventure / ropes courses, it is easy to put on and as adjustable for small people as large ones.

STRONG POINTS:
  • Reinforced tie-in point.

  • 3 Autolock buckles + loosening paws.

  • Separate elastics to avoid tangled thigh straps.

  • The 2 thighs are interlocked to avoid mixing them up.

  • Colour guide to right thigh, left thigh.

  • All height and thigh adjustement straps are tted with tipsfor ease of use.

  • A tape ring running on the waistbelt allows the pulley to be secured.

  • 2 reinforced gear loops by means of double stitching.

  • Comfort foam.

Retail price

US$ 48.62
Price is a static conversion from
€43.76 EUR
Weight (g)

Weight

In grams, the weight, as stated by the manufacturer/brand.

If there are differences in weight (due to multiple sizes or optional accessories) we'll list them here.

The default weight is the middle-most size, often this is size M.

400 g

One Size: 400 g / 14.1 oz
(weight converted from grams to ounces)

Fit Unisex
Sizes XXS, XS, S, M, L, XL, XXL, XXXL, 1 Size Fits All
Gear Loops

Number of Gear Loops

Gear loops are used to hold gear (quickdraws, cams, etc) onto your harness. 4 gear loops is most common.

0 - 1 Gear Loops

Most often on full body harnesses or guide/gym style harnesses.

2-3 Gear Loops

Mostly found on lighter harnesses made for [ski] mountaineering or high-end sport climbing where weight is a high priority.

4 - 5 Gear Loops

The standard/most common number for climbing harnesses. Perfect for sport and trad.

More Than 6 Gear Loops

Designed for long multi-pitch and big wall climbing, found on harnesses made to hold the maximum amount of gear.

Worth Considering

Occasionally, the number of gear loops will change on a harness model depending on the size. There could be 7 gear loops for the med/large but only 5 gear loops for the xsmall/small. In this case we list the highest number for the filters, and then write an explanation on the product page like, “Size S/XS can only fit 5 gear loops.”

2 Gear loops
Ice Clip Slots

Ice Clip Slot

Ice clipper slots are made to fit a carabiner that holds ice screws. These slots are generally only used by ice climbers but there is no disadvantage to having them on your harness.

Less than 40% of harnesses will have ice clipper slots. And those harnesses will usually have 2 or 4 slots, often located next to, or between, the gear loops.

No, 0
Belay / Tie-In Tie-In
Waist Buckle Type Quick Adjust
Leg Buckle Type Quick Adjust
Drop Seat No
Haul Loop

Haul Loop

Trad climbers often look for a haul loop as they're intended to haul a rope (second line) or pack (while you climb the chimney).

A haul loop can also hold shoes or other accessories. Although not the intended use, it is also commonly used to hold a chalk bag.

No ­
Certification CE
Size Chart

One Size
Waist : 45-115 cm / 17.7-45.3 in
Legs : 26-72 cm / 10.2-28.3 in
(we converted centimeters to inches)

No reviews yet.

If you know of a good product video that should be here, let us know, and we'll put it up.

If you're looking for gear videos in general, check out our Vimeo and YouTube channels to see the newest gear.

The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.