Lhotse New

Lhotse

Rating

Description

The safety of harness has been improved by the use of a wider connector, while its durability was adjusted through polyamide primary applied in the manufacture of seat belts. Harness is adjustable (waist and legs), designed for summer and winter climbing in the mountains and on the long rock routes. Harness is fully adjustable, making it fit to the clothes. Wide waist and pantlegs provide adequate comfort on long climbs. For better convenience, the harness is equipped with 4 lower gear loops. In order to achieve a greater range of adjustment, remove the tape from the rubber loops on both sides of the belt. In this way you can get a smaller waist size.

Retail price

US$ 39.84

Price is a static conversion from

zł149.00 PLN

This Product is Hard to Find.

We don’t know where you can buy this item online in the US. We’ll continue to check all the major retailers and will update this page as soon as we find one.

If you know where to find this online in the US, let us know, and we’ll add the link.

Technical specs

Weight (g) Weight In grams, the weight, as stated by the manufacturer/brand. If there are differences in weight (due to multiple sizes or optional accessories) we'll list them here. The default weight is the middle-most size, often this is size M.	430 g XS: 400 g / 14.1 oz S: 420 g / 14.8 oz M: 430 g / 15.2 oz L: 455 g / 16 oz XL: 475 g / 16.8 oz XXL: 505 g / 17.8 oz (weight converted from grams to ounces)
Fit	Unisex
Sizes	XXS, XS, S, M, L, XL, XXL, XXXL
Gear Loops Number of Gear Loops Gear loops are used to hold gear (quickdraws, cams, etc) onto your harness. 4 gear loops is most common. 0 - 1 Gear Loops Most often on full body harnesses or guide/gym style harnesses. 2-3 Gear Loops Mostly found on lighter harnesses made for [ski] mountaineering or high-end sport climbing where weight is a high priority. 4 - 5 Gear Loops The standard/most common number for climbing harnesses. Perfect for sport and trad. More Than 6 Gear Loops Designed for long multi-pitch and big wall climbing, found on harnesses made to hold the maximum amount of gear. Worth Considering Occasionally, the number of gear loops will change on a harness model depending on the size. There could be 7 gear loops for the med/large but only 5 gear loops for the xsmall/small. In this case we list the highest number for the filters, and then write an explanation on the product page like, “Size S/XS can only fit 5 gear loops.”	4 Gear loops
Ice Clip Slots Ice Clip Slot Ice clipper slots are made to fit a carabiner that holds ice screws. These slots are generally only used by ice climbers but there is no disadvantage to having them on your harness. Less than 40% of harnesses will have ice clipper slots. And those harnesses will usually have 2 or 4 slots, often located next to, or between, the gear loops.	No
Belay / Tie-In	One Loop
Waist Buckle Type	Manual Doubleback
Leg Buckle Type	Manual Doubleback
Drop Seat	Yes
Haul Loop Haul Loop Trad climbers often look for a haul loop as they're intended to haul a rope (second line) or pack (while you climb the chimney). A haul loop can also hold shoes or other accessories. Although not the intended use, it is also commonly used to hold a chalk bag.	Yes
Certification	CE
Size Chart	XS (will fit the upper range of XXS) Waist: 55-70 cm / 21.7-27.6 in Legs: 46-56 cm / 18.1-22 in S Waist: 63-71 cm / 24.8-28 in Legs: 45-57 cm / 17.7-22.4 in M Waist: 72-81 cm / 28.3-31.9 in Legs: 52-62 cm / 20.5-24.4 in L Waist: 85-100 cm / 33.5-39.4 in Legs: 56-66 cm / 22-26 in XL Waist: 95-110 cm / 37.4-43.3 in Legs: 56-66 cm / 22-26 in XXL (will fit the lower range of XXXL) Waist: 105-120 cm / 41.3-47.2 in Legs: 60-70 cm / 23.6-27.6 in (we converted centimeters to inches)