Describes with words and helpful photos, how to protect Petzl Ascenders.
Pro Traxion
Description
Very efficient loss-resistant progress capture pulley.
The PRO TRAXION progress capture pulley was designed to allow rope installation while the pulley is connected to the anchor. With its large diameter sheave and great efficiency, it is particularly appropriate for hauling heavy loads on big walls. The side plate locks when loaded and prevents opening of the pulley during use.
- Loss-resistant pulley:
- allows a rope to be installed when the pulley is connected to the anchor - Well suited for hauling heavy loads:
- large diameter aluminum sheave mounted on sealed ball bearings for excellent efficiency
- side plate locks when loaded and prevents opening of the pulley during use - Versatile:
- lower connection point for creating different types of hauling systems
- toothed cam with self-cleaning slot optimizes performance under any conditions: frozen or dirty ropes...
- may be used as simple pulley by locking the cam in the raised position - Material(s): aluminum, stainless steel, nylon
- Sheave type: sealed ball bearings
- Sheave diameter: 38 mm
- Working load: 2 x 2,5 = 5 kN
- Breaking strength: 2 x 11 = 22 kN
- Working load as progress capture pulley: 2,5 kN
- Breaking strength as progress capture pulley: 4 kN
- Efficiency: 95 %
Very efficient loss-resistant progress capture pulley.
The PRO TRAXION progress capture pulley was designed to allow rope installation while the pulley is connected to the anchor. With its large diameter sheave and great efficiency, it is particularly appropriate for hauling heavy loads on big walls. The side plate locks when loaded and prevents opening of the pulley during use.
- Loss-resistant pulley:
- allows a rope to be installed when the pulley is connected...
Retail price
When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!
Weight (g) | 265 g |
Ascender Type![]() ![]() |
Backup / Rope Grab / Capture Pulley |
Tooth Type![]() ![]() |
Toothed |
Bottom Holes![]() ![]() | Not applicable for this ascender type |
Handedness![]() ![]() |
Both / Either |
Features![]() ![]() | Built-in roller |
Rope Range![]() ![]() |
8 - 13mm EN 567 (as a rope clamp)
|
Certification![]() ![]() |
CE EN 567 (holding 4kN) |
No reviews yet.
If you know of a good product video that should be here, let us know, and we'll put it up.
If you're looking for gear videos in general, check out our Vimeo and YouTube channels to see the newest gear.