A pictoral representation of UIAA-101 and EN-892 standards for ropes.
The 7.9mm Ambition 30m Dry is officially retired.You've found a page of history! The 7.9mm Ambition 30m Dry is no longer produced by Tendon and it is not available to buy from major online retailers. You can still check out all the specs and claim your ownership.
7.9mm Ambition 30m Dry
A lightweight rope certified as both a half and twin rope. Good durability and low weight make this rope the best companion when glacier walking or ski mountaineering.
|Weight|| 39.0 g/m|
2.579 lbs / 1170 g
|Diameter (millimeters)||7.9 mm|
|Length (meters)||30 m|
|Rope Type||Half (Double)|
|UIAA Falls (Single / Half / Twin)||0 / 6 / 16|
|Dynamic Elongation (Single / Half / Twin)||0.0 % / 34.0 % / 32.0 %|
|Static Elongation (Single / Half / Twin)||0.0 % / 6.7 % / 7.0 %|
|Impact Force (Single / Half / Twin)||0.00 kN / 5.40 kN / 7.80 kN|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)||0 mm|
|Type of Middle Mark||None|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.