A pictoral representation of UIAA-101 and EN-892 standards for ropes.
9.8mm Solid Work 50m 2xDry
Solid rock requires Solid Work – our workhouse for tough routes, both at sport venues and alpine multi-pitch. With a robust 9.8 mm and 64 g per meter, our Standard impregnation for outstanding abrasion-resistance and solid woven ends. The Solid Work is your rope for working routes.
|Weight|| 64.0 g/m|
7.054 lbs / 3200 g
|Diameter (millimeters)||9.8 mm|
|Length (meters)||50 m|
|UIAA Falls (Single / Half / Twin)||9 / 00|
|Dynamic Elongation (Single / Half / Twin)||35.0 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||6.2 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||7.10 kN / 0.00 kN / 0.00 kN|
|Dry Treatment||Sheath & Core|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)|||
|Type of Middle Mark||None|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.