A pictoral representation of UIAA-101 and EN-892 standards for ropes.
10.0mm Galaxy Protect 70m Dry
Abrasion-resistant and durable single rope for the most demanding requirements! The three versions mean that all-round climbers will find the 10.0 Galaxy to be a reliable companion for a variety of vertical activities.
When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!
|Weight|| 68.0 g/m|
10.494 lbs / 4760 g
|Diameter (millimeters)||10.0 mm|
|Length (meters)||70 m|
|UIAA Falls (Single / Half / Twin)||10 / 00|
|Dynamic Elongation (Single / Half / Twin)||30.0 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||6.0 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||8.50 kN / 0.00 kN / 0.00 kN|
|Sheath Proportion (%)||36.0 %|
|Sheath Slippage (mm)||0 mm|
|Type of Middle Mark||None|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.