A pictoral representation of UIAA-101 and EN-892 standards for ropes.
9.8mm Heron Pro 70m 2xDry
The tried and trusted Heron. Thanks to our high-quality finishing processes and its good handling, the Heron covers a wide range of uses.
Lightweight, high strength combined with superb handling.
Pro Dry for outstanding dirt and water resistance.
Thermo Shield treatment for perfect handling.
|Weight|| 62.0 g/m|
8.201 lbs / 3720 g
|Diameter (millimeters)||9.8 mm|
|Length (meters)||70 m|
|UIAA Falls (Single / Half / Twin)||10 / 00|
|Dynamic Elongation (Single / Half / Twin)||33.0 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||8.3 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||8.90 kN / 0.00 kN / 0.00 kN|
|Dry Treatment||Sheath & Core|
|Sheath Proportion (%)||40.0 %|
|Sheath Slippage (mm)||0 mm|
|Type of Middle Mark||None|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.