How to use Edelrid rope, safety, storage, transport, care, lifespan and replacement with instructional pictures.
The 6.9mm Flycatcher 70m 2xDry x2 is officially retired.You've found a page of history! The 6.9mm Flycatcher 70m 2xDry x2 is no longer produced by Edelrid and it is not available to buy from major online retailers. You can still check out all the specs and claim your ownership.
6.9mm Flycatcher 70m 2xDry x2
Ultra-light, minimal diameter
Pro Shield finish for optimal performance
Dry Shield finish for outstanding dirt and water resistance
Thermo Shield treatment for perfect handling
Only available as a set (2 ropes and beay device Micro Jul)
|Weight|| 35.0 g/m|
5.401 lbs / 2450 g
|Diameter (millimeters)||6.9 mm|
|Length (meters)||70 m|
|Rope Type||Twin (always sold as a pair of ropes)|
|UIAA Falls (Single / Half / Twin)||- / - / 17|
|Dynamic Elongation (Single / Half / Twin)||- / - / 27.0 %|
|Static Elongation (Single / Half / Twin)||- / - / 7.4 %|
|Impact Force (Single / Half / Twin)||- / - / 9.80 kN|
|Dry Treatment||Sheath & Core|
|Sheath Proportion (%)||35.0 %|
|Sheath Slippage (mm)||0 mm|
|Rope End Marker||None|
|Certification||CE, EN, UIAA|
A pictoral representation of UIAA-101 and EN-892 standards for ropes.
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.