A pictoral representation of UIAA-101 and EN-892 standards for ropes.
9.8mm Rope 60m Dry
Rope's kern and longlife treatment are this products key assets.
Special treatment that increases the rope's life span and prevents dirt and water seepage.
Thanks to this new ultrasonic fusion process, deterioration of rope ends are out of the question.
Main fabric : 100.0% Polyamide 6 (PA6).
|Weight|| 63.0 g/m|
8.333 lbs / 3780 g
|Diameter (millimeters)||9.8 mm|
|Length (meters)||60 m|
|UIAA Falls (Single / Half / Twin)||7 / 00|
|Dynamic Elongation (Single / Half / Twin)||33.1 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||9.8 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||8.60 kN / 0.00 kN / 0.00 kN|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)||0 mm|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.