A pictoral representation of UIAA-101 and EN-892 standards for ropes.
The 10.2mm Rope 60m Dry is officially retired.You've found a page of history! The 10.2mm Rope 60m Dry is no longer produced by Simond and it is not available to buy from major online retailers. You can still check out all the specs and claim your ownership.
10.2mm Rope 60m Dry
This rope is 10.2 mm in diameter enabling you to safely belay with all belaying devices available on the market.
Easy to hand hold, perfect rope for indoor climbing wall up to a maximum of 28m.
|Weight|| 65.0 g/m|
8.598 lbs / 3900 g
|Diameter (millimeters)||10.2 mm|
|Length (meters)||60 m|
|UIAA Falls (Single / Half / Twin)||6 / 00|
|Dynamic Elongation (Single / Half / Twin)||30.8 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||9.0 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||9.00 kN / 0.00 kN / 0.00 kN|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)||0 mm|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.