Collecting every piece of gear takes a little time.
We think it's worth the wait.

Nice choice!
Give us a moment to collect those options for you.

Rock Empire Lightning Harness

Lightning

Rating

no ratings

Description

Re-designed, lighter-weight, all around harness with a unique quick, positioning system - good for use while wearing skis.
4 Gear loops (5 kg).
Fully adjustable.

Weight (g)

Weight

In grams, the weight, as stated by the manufacturer/brand.

If there are differences in weight (due to multiple sizes or optional accessories) we'll list them here.

The default weight is the middle-most size, often this is size M.

396 g

At this time Rock Empire only gives out the weight for Size M.

Fit Unisex
Sizes XS, S, M, L, XL, XXL
Gear Loops

Number of Gear Loops

Gear loops are used to hold gear (quickdraws, cams, etc) onto your harness. 4 gear loops is most common.

0 - 1 Gear Loops

Most often on full body harnesses or guide/gym style harnesses.

2-3 Gear Loops

Mostly found on lighter harnesses made for [ski] mountaineering or high-end sport climbing where weight is a high priority.

4 - 5 Gear Loops

The standard/most common number for climbing harnesses. Perfect for sport and trad.

More Than 6 Gear Loops

Designed for long multi-pitch and big wall climbing, found on harnesses made to hold the maximum amount of gear.

Worth Considering

Occasionally, the number of gear loops will change on a harness model depending on the size. There could be 7 gear loops for the med/large but only 5 gear loops for the xsmall/small. In this case we list the highest number for the filters, and then write an explanation on the product page like, “Size S/XS can only fit 5 gear loops.”

4 Gear loops
Ice Clip Slots

Ice Clip Slot

Ice clipper slots are made to fit a carabiner that holds ice screws. These slots are generally only used by ice climbers but there is no disadvantage to having them on your harness.

Less than 40% of harnesses will have ice clipper slots. And those harnesses will usually have 2 or 4 slots, often located next to, or between, the gear loops.

No­
Belay / Tie-In One Loop
Waist Buckle Type Manual Doubleback
Leg Buckle Type Clip
Drop Seat No
Haul Loop

Haul Loop

Trad climbers often look for a haul loop as they're intended to haul a rope (second line) or pack (while you climb the chimney).

A haul loop can also hold shoes or other accessories. Although not the intended use, it is also commonly used to hold a chalk bag.

No ­
Certification EN
Size Chart

XS
Waist: 57-70 cm / 22.4-27.6 in
Legs: 43-53 cm / 16.9-20.9 in
S
Waist: 63-76 cm / 24.8-29.9 in
Legs: 47-57 cm / 18.5-22.4 in
M
Waist: 72-85 cm / 28.3-33.5 in
Legs: 52-62 cm / 20.5-24.4 in
L
Waist: 80-93 cm / 31.5-36.6 in
Legs: 57-67 cm / 22.4-26.4 in
XL (will fit the lower range of XXL)
Waist: 87-100 cm / 34.3-39.4 in
Legs: 61-71 cm / 24-28 in
(we converted centimeters to inches)

No reviews yet.

If you know of a good product video that should be here, let us know, and we'll put it up.

If you're looking for gear videos in general, check out our Vimeo and YouTube channels to see the newest gear.

The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.