Collecting every piece of gear takes a little time.
We think it's worth the wait.

Nice choice!
Give us a moment to collect those options for you.

DMM Peenut 1
  • DMM Peenut 1
  • DMM Peenut 1

Peenut 1

Rating

My vote: None ( 5.4 avg )

Description

Peenuts have the same asymmetrical taper as Alloy Offsets, allowing them to protect flared and irregular shaped cracks more effectively than symmetrical nuts. Their large surface area helps dissipate forces, making them suitable for protecting fragile rock.

As climbs become harder, the need to make the most of all available protection increases. Micro protection lets you protect cracks which normal sized pieces would not fit. Having these wires on your rack gives you more options.

Nuts with an offset taper protect cracks where normal nuts would not sit properly, such as flared cracks and peg scars. Use in combination with normal nuts to find security in almost any crack.

These nuts have large surface areas that spread forces in a fall across a greater area, increasing placement security in fragile rock. They increase security on routes where fragile rock may be encountered.

These nuts have large surface areas that spread forces in a fall across a greater area, increasing placement security in fragile rock. They increase security on routes where fragile rock may be encountered.

Passive protection works by jamming in constrictions to prevent falls. It is suitable for use in all conditions. Unlike active protection such as cams, passive protection can be used in wet or icy cracks, where friction is reduced.

 

Retail price

US$ 12.95

When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!

Award Image
Weight (grams / ounces) 8 g / 0.28 oz
Size 1 micro nut (full strength)
Colors as a Nut Set Multi
Strength (kilonewtons) 4 kN
Color Red
Offset Yes offset
Range (inches / millimeters) 0.26 in - 0.45 in
6.50 mm - 11.50 mm
Material(s) Main Material: Aluminum
­
Certification ­

No reviews yet.

Outdoor Gear Lab Gear Review rating 4.9/5

Peenuts are a good complement to a rack of any type, especially those of other DMM or Wild Country nuts where Peenuts will follow the same color scheme. They are best for smaller cracks if you aren't willing to give up the durability of aluminum. They fit pin scars and shallow flares well for aid climbers but they should not replace a set of brass nuts.

DMM Peenut Nut Review

The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.