A pictoral representation of UIAA-101 and EN-892 standards for ropes.
The 11.0mm Trust 70m is officially retired.You've found a page of history! The 11.0mm Trust 70m is no longer produced by Tendon and it is not available to buy from major online retailers. You can still check out all the specs and claim your ownership.
11.0mm Trust 70m
A Dynamic single rope with high safety factor and utmost durability. Designed for heavy usage in rope training centres and climbing schools - where the properties of this product will be appreciated most.
|Weight|| 79.0 g/m|
12.191 lbs / 5530 g
|Diameter (millimeters)||11.0 mm|
|Length (meters)||70 m|
|UIAA Falls (Single / Half / Twin)||16 / 00|
|Dynamic Elongation (Single / Half / Twin)||34.0 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||6.1 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||8.10 kN / 0.00 kN / 0.00 kN|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)||0 mm|
|Type of Middle Mark||None|
|Rope End Marker||None|
|Certification||CE, EN, UIAA|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.