A pictoral representation of UIAA-101 and EN-892 standards for ropes.
8.5mm Fat Twin 30m 2xDry
So you want a half rope that will give you more performance and additional safety reserves? Then you need our Fat Twin – it comes with an extra-large portion of performance and is guaranteed to fulfill all requirements. With its half and twin rope certification, you’ll always be in good company. And thanks to its nano-technology impregnation, dirt, water and abrasion can hardly get near it. The Fat Twin’s core and sheath are woven together so that they remain inseparable from day one. The Fat Twins are your buddies for big routes.
|Weight|| 46.0 g/m|
3.042 lbs / 1380 g
|Diameter (millimeters)||8.5 mm|
|Length (meters)||30 m|
|UIAA Falls (Single / Half / Twin)||0 falls / - / 10 falls|
|Dynamic Elongation (Single / Half / Twin)||0.0 % / - / 35.0 %|
|Static Elongation (Single / Half / Twin)||0.0 % / - / 7.0 %|
|Impact Force (Single / Half / Twin)||0.00 kN / - / 5.00 kN|
|Dry Treatment||Sheath & Core|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)|||
|Type of Middle Mark||None|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.