A pictoral representation of UIAA-101 and EN-892 standards for ropes.
7.9mm Thin Twin 50m 2xDry
Bis dat, qui cito dat, Latin for ‘he gives twice, who gives promptly’ is saying coined by Publilius Syrus. The same applies to our half and twin rope certified Thin Twin. Whoever pays out rope quickly, gives double the safety and performance. Its 7.9 mm diameter and ultra-light- weight 39 g per meter mean that you can give maximum performance on longer multi-pitch routes. The Thin Twin has a Standard impregnation, which makes it waterrepellent and abrasion-resistant, while the compact braided construction of the last 15 mm is guarantee not to come loose.
|Weight|| 39.0 g/m|
4.299 lbs / 1950 g
|Diameter (millimeters)||7.9 mm|
|Length (meters)||50 m|
|UIAA Falls (Single / Half / Twin)||0 / - / 16|
|Dynamic Elongation (Single / Half / Twin)||0.0 % / - / 32.0 %|
|Static Elongation (Single / Half / Twin)||0.0 % / - / 7.0 %|
|Impact Force (Single / Half / Twin)||0.00 kN / - / 7.80 kN|
|Dry Treatment||Sheath & Core|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)|||
|Type of Middle Mark||None|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.