A pictoral representation of UIAA-101 and EN-892 standards for ropes.
9.6mm Hero 60m
Excellent single rope for sport climbers.
Single Tech construction provides increased resistance to abrasion.
Low weight and great handling qualities.
Rope is soft and easy to manipulate in belay devices.
Even with a small diameter, this rope provides long lifespan.
Thermotransfer end marking.
|Weight|| 60.0 g/m|
7.936 lbs / 3600 g
|Diameter (millimeters)||9.6 mm|
|Length (meters)||60 m|
|UIAA Falls (Single / Half / Twin)||8 / 00|
|Dynamic Elongation (Single / Half / Twin)||36.5 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||6.3 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||7.00 kN / 0.00 kN / 0.00 kN|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)|||
|Type of Middle Mark||Marking|
|Rope End Marker||Yes|
|Certification||CE, EN, UIAA|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.