A pictoral representation of UIAA-101 and EN-892 standards for ropes.
10.4mm Duran 50m
The rope is made by SINGING ROCK patented technology ROUTE 44, which gives to the rope well-balanced weight and diameter.
All parameters are very much in tune with each other.
Rope is very compact, durable and comfortable.
Impact force and number of falls are standard.
The main feature of this rope is its thicker sheath with perfect abrasion resistance.
The rope has good handling characteristics and is suitable for use with most belaying devices.
Ideal for areas with rough rocks and indoor climbing.
Thermotransfer end marking.
|Weight|| 70.0 g/m|
7.716 lbs / 3500 g
|Diameter (millimeters)||10.4 mm|
|Length (meters)||50 m|
|UIAA Falls (Single / Half / Twin)||10 / 00|
|Dynamic Elongation (Single / Half / Twin)||31.3 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||6.0 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||8.70 kN / 0.00 kN / 0.00 kN|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)|||
|Type of Middle Mark||Marking|
|Rope End Marker||Yes|
|Certification||CE, EN, UIAA|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.