A pictoral representation of UIAA-101 and EN-892 standards for ropes.
9.4mm Strike 30m 2xDry
An excellent single rope with low weight, great technical parameters and a simple braiding system (SBS) of the sheath, which makes the rope not only more resistant to abrasion, but also soft and easy to manipulate. The best choice for both performance and sport climbing.
|Weight|| 58.0 g/m|
3.836 lbs / 1740 g
|Diameter (millimeters)||9.4 mm|
|Length (meters)||30 m|
|UIAA Falls (Single / Half / Twin)||5 falls / 0 falls / 0 falls|
|Dynamic Elongation (Single / Half / Twin)||37.0 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||6.2 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||7.00 kN / 0.00 kN / 0.00 kN|
|Dry Treatment||Sheath & Core (aka Complete Shield)|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)|||
|Type of Middle Mark||None|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.