A pictoral representation of UIAA-101 and EN-892 standards for ropes.
10.6mm Wall 60m
PMI® WALL ROPE is a top choice for climbing gyms, schools, guides and other situations where it will see some heavy use. It has a 22% thicker sheath than most other PMI Dynamic™ ropes, providing superior protection from dirt and wear over time. Although it is a top choice for gyms, this versatile rope is also rated for lead climbing under UIAA standards, so you can take it with you wherever you go!
When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!
|Weight|| 69.0 g/m|
9.127 lbs / 4140 g
|Diameter (millimeters)||10.6 mm|
|Length (meters)||60 m|
|UIAA Falls (Single / Half / Twin)||8 / 00|
|Dynamic Elongation (Single / Half / Twin)||33.0 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||6.8 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||8.20 kN / 0.00 kN / 0.00 kN|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)|||
|Type of Middle Mark||None|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.