A pictoral representation of UIAA-101 and EN-892 standards for ropes.
9.8mm Curve Unicore 60m 2xDry
The CURVE is fluid, lightweight and suits climbers who want to progress to a higher level. Now also available in Unicore version, which makes for an even safer and more versatile rope to go for.
|Weight|| 64.0 g/m|
8.465 lbs / 3840 g
|Diameter (millimeters)||9.8 mm|
|Length (meters)||60 m|
|UIAA Falls (Single / Half / Twin)||8 / 00|
|Dynamic Elongation (Single / Half / Twin)||37.0 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||9.4 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||8.00 kN / 0.00 kN / 0.00 kN|
|Dry Treatment||Sheath & Core (aka SuperEverdry)|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)||0 mm|
|Type of Middle Mark||Marking|
|Rope End Marker||None|
|Certification||CE, EN, UIAA|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.