How to use Edelrid rope, safety, storage, transport, care, lifespan and replacement with instructional pictures.
The 10mm Harrier 50m Dry is officially retired.You've found a page of history! The 10mm Harrier 50m Dry is no longer produced by Edelrid and it is not available to buy from major online retailers. You can still check out all the specs and claim your ownership.
10mm Harrier 50m Dry
The new Dry Shield finish has helped us reduce the diameter on the Harrier, a classic EDELRID rope, without reducing its strength. With the advantage of this tough construction, the Harrier is useable in both the mountains and low-lying crags. The v Dry Shield finish protects against moisture and dirt and the Thermo Shield treatment guarantees an agreeable handling even after a lot of use and abuse.
|Weight|| 65.0 g/m|
7.165 lbs / 3250 g
|Diameter (millimeters)||10.0 mm|
|Length (meters)||50 m|
|UIAA Falls (Single / Half / Twin)||9 / 00|
|Dynamic Elongation (Single / Half / Twin)||32.0 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||9.3 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||9.00 kN / 0.00 kN / 0.00 kN|
|Sheath Proportion (%)||38.0 %|
|Sheath Slippage (mm)||0 mm|
|Type of Middle Mark||None|
|Rope End Marker||None|
With minimal kinkage out of the box, this rope had a soft feel and managed to maintain smooth operation through a variety of belay devices, including an old-school Sticht plate. Every tester said he or she would definitely buy this rope, including a grizzled veteran bolter who needs a high-performance workhorse rope. That same tester complimented the hard-wearing sheath, which he estimated would take a long time to wear out.