Collecting every piece of gear takes a little time.
We think it's worth the wait.

Nice choice!
Give us a moment to collect those options for you.

DMM 10.0mm Statement
  • DMM 10.0mm Statement
  • DMM 10.0mm Statement

10.0mm Statement 50m



no ratings


The Statement uses the ThermoControl post production treatment that is usually only found on more expensive ropes – this makes it supple and user friendly straight from the bag whilst retaining the durability normally reserved for a stiffer rope. Ideal as either a first time buy or for those looking for excellent value for money.

Tough, all-round rope at excellent price points.
ThermoControl treatment for superb handling and stability.
Good balance between handling and durability due to ThermoControl treatment.
30 and 40m lengths for climbing wall visits.

Retail price

US$ 142.98
Price is a static conversion from
£114.50 GBP
Weight 65.0 g/m
7.165 lbs / 3250 g
Diameter (millimeters) 10.0 mm
Length (meters) 50 m
Rope Type Single 
UIAA Falls (Single / Half / Twin) ­7  / 00
Dynamic Elongation (Single / Half / Twin) - / 0.0 % / 0.0 %
Static Elongation (Single / Half / Twin) - / 0.0 % / 0.0 %
Impact Force (Single / Half / Twin) 8.70 kN / 0.00 kN / 0.00 kN
Dry Treatment None­
Sheath Proportion (%) 38.0 %
Sheath Slippage (mm) ­
Type of Middle Mark None
Rope End Marker None
Certification ­

If you know of a good product video that should be here, let us know, and we'll put it up.

If you're looking for gear videos in general, check out our Vimeo and YouTube channels to see the newest gear.

No reviews yet.

The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.