A pictoral representation of UIAA-101 and EN-892 standards for ropes.
10.0mm Statement 100m
The Statement uses the ThermoControl post production treatment that is usually only found on more expensive ropes – this makes it supple and user friendly straight from the bag whilst retaining the durability normally reserved for a stiffer rope. Ideal as either a first time buy or for those looking for excellent value for money.
Tough, all-round rope at excellent price points.
ThermoControl treatment for superb handling and stability.
Good balance between handling and durability due to ThermoControl treatment.
30 and 40m lengths for climbing wall visits.
|Weight|| 65.0 g/m|
14.330 lbs / 6500 g
|Diameter (millimeters)||10.0 mm|
|Length (meters)||100 m|
|UIAA Falls (Single / Half / Twin)||7 / 00|
|Dynamic Elongation (Single / Half / Twin)||- / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||- / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||8.70 kN / 0.00 kN / 0.00 kN|
|Sheath Proportion (%)||38.0 %|
|Sheath Slippage (mm)|||
|Type of Middle Mark||None|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.