A pictoral representation of UIAA-101 and EN-892 standards for ropes.
10.6mm DynaGym 100m
This durable, long lasting dynamic rope is UIAA and CE certified to withstand the punishment of indoor climbing walls. Manufactured with a thicker sheath than traditional dynamic ropes of similar diameter. It exhibits minimal sheath slippage and features a low impact force for leading or top-roping in gyms.
When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!
|Weight|| 77.0 g/m|
16.975 lbs / 7700 g
|Diameter (millimeters)||10.6 mm|
|Length (meters)||100 m|
|UIAA Falls (Single / Half / Twin)||11 / 00|
|Dynamic Elongation (Single / Half / Twin)||34.2 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||9.0 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||8.30 kN / 0.00 kN / 0.00 kN|
|Sheath Proportion (%)||41.0 %|
|Sheath Slippage (mm)||-5 mm|
|Type of Middle Mark||None|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.