A pictoral representation of UIAA-101 and EN-892 standards for ropes.
10.2mm Eliminator 60m Bicolor 2xDry
The 10.2 mm Eliminator features a weight per meter of only 64 grams, a low impact force and low static elongation. The Eliminator has become the choice for the serious climber who wants to shed some weight from traditional 10.5mm ropes.
|Weight|| 64.0 g/m|
8.470 lbs / 3840 g
|Diameter (millimeters)||10.2 mm|
|Length (meters)||60 m|
|UIAA Falls (Single / Half / Twin)||8 / 00|
|Dynamic Elongation (Single / Half / Twin)||31.7 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||8.5 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||8.00 kN / 0.00 kN / 0.00 kN|
|Dry Treatment||Sheath & Core|
|Sheath Proportion (%)||34.0 %|
|Sheath Slippage (mm)||3 mm|
|Type of Middle Mark||Bicolor|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.