A pictoral representation of UIAA-101 and EN-892 standards for ropes.
8.1mm Ice Line Unicore 60m 2xDry
Already considered to be the must-have rope for ice climbers and expert alpinists alike for its extreme fluidity and very low impact force, ICE LINE is henceforward available with the new UNICORE technology. Thanks to adherence of the core and sheath, ICE LINE benefits from extra security – indispensable on thin rope.
The thinness of the rope gives it exceptionally easy running, but also demands appropriate and specific belaying technique. It's in Golden Dry that this exceptional rope really comes into its own. Used as 2 strands of 60 m, it allows for long runouts, but also to retain sufficient length even if you have to cut the ends of rope damaged by crampons or axe.
• The weight and free-running of twin rope plus the advantages of a double rope.
• Ultra low impact force.
• The rope doesn't bunch and stays flexible for the long term.
• Has all the advantages of the UNICORE technology.
When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!
|Weight|| 39.0 g/m|
5.158 lbs / 2340 g
|Diameter (millimeters)||8.1 mm|
|Length (meters)||60 m|
|Rope Type||Half (Double)|
|UIAA Falls (Single / Half / Twin)||0 falls / 6 falls / 0 falls|
|Dynamic Elongation (Single / Half / Twin)||0.0 % / - / 0.0 %|
|Static Elongation (Single / Half / Twin)||0.0 % / - / 0.0 %|
|Impact Force (Single / Half / Twin)||0.00 kN / 4.90 kN / 0.00 kN|
|Dry Treatment||Sheath & Core (aka Golden Dry)|
|Sheath Proportion (%)||41.0 %|
|Sheath Slippage (mm)||0 mm|
|Type of Middle Mark||None|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.