- New handle for Winter 2017
- A lightweight, versatile tool for the technical alpinist
- Hot-forged aluminum alloy head allows for 2 configurations: adze and hammer
- 3 part handle can be optimized for different conditions
- Interchangeable steel spike has a hole large enough to clip a carabiner for use with lanyards
The X-Light takes the same quality forged components and profiled geometries as the X-Dream and X-All Mountain tools, but simplifies the shaft to make it the most suitable axe for low-angle terrain typical of light and fast technical ascents. Two different head configurations (adze and hammer) allow the tool to be perfectly optimized for the objective. The single-curve shaft is optimized with the angle of the pick for solid performance on alpine ice and for use as a cane. Carabiner holes at the head and spike accommodate traditional leashes or lanyards. The new 3 part handle can be assembled in the precise way that fits the terrain being climbed with an upper pommel that can be repositioned without tools. It also increases mechanical resistance to the specific stresses on each part of the handle. The hammer and adze components have been shaped for a comfortable grip and the pick does not have teeth near the shaft to further increase comfort and help limit wear and tear on gloves.
When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!
|Weight (g / oz)|
Weight (g / oz)
In grams and ounces, the weight, as stated by the manufacturer/brand.
The weight is the packaged weight. If there are differences in weight (due to optional accessories) we'll note them here.
|520 g / 18.40 oz|
|Length (cm)||50 cm|
|Head Details|| Adze (pair: X-Light Hammer
1 Screw adjustment
|Ice Rating|| Pick: T / Type 2|
Shaft: T / Type 2
|Picks|| Included with the tool: |
|Pommel & Grip|
Pommel & Grip
Fixed: An upper pommel that is fixed in place (it cannot move up/down the shaft nor can it be taken off).
Adjustable: An upper pommel that can move up and down the shaft.
Removable & Adjustable: An upper pommel that is completely removable and also adjustable.
Removeable: An upper pommel that is either on or off (it cannot move up/down the shaft).
None: If there is no upper pommel that comes standard (there may or may not be options to buy separately).
Fixed: A lower pommel that is fixed in place (the angle cannot be changed nor can it be taken off).
Adjustable: A lower pommel that can change angle or location on the tool.
Removable: When the lower pommel can be removed but not adjusted.
None: If there is no lower pommel that comes standard (there may or may not be options to buy separately).
| Upper Pommel: Removable & adjustable|
Lower Pommel: Fixed
Grip Size: 1 size fits all (not adjustable)
|Materials|| Pick: Chromoly Steel|
Head: Hot-forged Aluminum Alloy
Shaft: 7075-T6 Aluminum Alloy
The main climbing gear certifications are CE and UIAA--and normally the UIAA creates the rules that the CE body also supports. When possible, we try to list all the certifications the product carries.
To sell a climbing product in Europe, the device must be CE certified. There are no official requirements to sell climbing gear in the US. The UIAA certification is a voluntary process.