The Guru is officially retired.You've found a page of history! The Guru is no longer produced by Singing Rock and it is not available to buy from major online retailers. You can still check out all the specs and claim your ownership.
Men´s all-round harness with adjustable leg loops
wider construction of the waist belt andleg loops provides maximum support
and comfort when hanging in the harness
3 Rock&Lock buckles enable to put on the harness when wearing skis or crampons
adjustable leg loops with innovated patented Rock&Lock buckles for fast and
BMI adjusting system for perfect fit when changing the layers or weight
tie-in points which have the most abrasive wear are reinforced by PAD webbing
perforated EVA foam inside the waist belt and leg loops with holes 5mm in diameter increases the breathability of the harness
inside mesh dissipate moisture and dries quickly in a wet conditions
laced technical textile increasing the waist belt rigidity and abrasion resistance
4 braided gear loops with a load capacity 5 kg
rear haul loop with a load capacity 30 kg
colour belay loop for proper tie-in/attachement point, strength 15 kN
2 slots for additional carabiner PORTER
fixed bridge between the leg loops provides a higher safety in case of wrong tie-in
plastic buckle and sleeve for quick removing and adjustement of the rear elastic straps
In grams, the weight, as stated by the manufacturer/brand.
If there are differences in weight (due to multiple sizes or optional accessories) we'll list them here.
The default weight is the middle-most size, often this is size M.
| 416 g|
M : 416 g / 14.7 oz
|Sizes||XS, S, M, L, XL, XXL|
Number of Gear Loops
Gear loops are used to hold gear (quickdraws, cams, etc) onto your harness. 4 gear loops is most common.
0 - 1 Gear Loops
Most often on full body harnesses or guide/gym style harnesses.
2-3 Gear Loops
Mostly found on lighter harnesses made for [ski] mountaineering or high-end sport climbing where weight is a high priority.
4 - 5 Gear Loops
The standard/most common number for climbing harnesses. Perfect for sport and trad.
More Than 6 Gear Loops
Designed for long multi-pitch and big wall climbing, found on harnesses made to hold the maximum amount of gear.
Occasionally, the number of gear loops will change on a harness model depending on the size. There could be 7 gear loops for the med/large but only 5 gear loops for the xsmall/small. In this case we list the highest number for the filters, and then write an explanation on the product page like, “Size S/XS can only fit 5 gear loops.”
|4 Gear loops|
|Ice Clip Slots|
Ice Clip Slot
Ice clipper slots are made to fit a carabiner that holds ice screws. These slots are generally only used by ice climbers but there is no disadvantage to having them on your harness.
Less than 40% of harnesses will have ice clipper slots. And those harnesses will usually have 2 or 4 slots, often located next to, or between, the gear loops.
|Belay / Tie-In||One Loop|
|Waist Buckle Type||Quick Adjust|
|Leg Buckle Type||Quick Adjust|
Trad climbers often look for a haul loop as they're intended to haul a rope (second line) or pack (while you climb the chimney).
A haul loop can also hold shoes or other accessories. Although not the intended use, it is also commonly used to hold a chalk bag.
|Certification||CE, EN, UIAA|
|Size Chart|| |