A pictoral representation of UIAA-105 and EN-12277 standards for harnesses.
Air CR Evo
Lightweight, robust harness with adjustable leg loops.
Edge-Load Construction on the waist and legs.
Elastic straps that connect the waist and legs with steel hooks.
Patented No-Twist belay loop.
Chalk bag loop.
Hub racking biner compatible.
The Air CR has become a popular choice for ice climbing and light and fast rock climbers alike due to its unparalleled blend of lightweight and comfort. The new Air CR has been redesigned to be even more comfortable and even more durable. Edge-load construction keeps the harness light while a new ergonomic cut with 3 mm of perforated EVA foam and soft 3D mesh also make it extremely comfortable for long days on the rock. The new external mesh is extremely resistant to wear and tear from rubbing in off-widths and chimneys. 4 webbing reinforced gear loops are positioned for easy access to gear and 3 Hub accessory biner attachments allow ice climbers to rack up to 18 screws with 6 positioned close to the front for extremely fast access.
When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!
In grams, the weight, as stated by the manufacturer/brand.
If there are differences in weight (due to multiple sizes or optional accessories) we'll list them here.
The default weight is the middle-most size, often this is size M.
| 350 g|
M : 350 g / 12.3 oz
CAMP doesn't provide the weights for other sizes so we're working on gathering this info by hand, stay tuned!
|Sizes||XS, S, M, L, XL, XXL|
Number of Gear Loops
Gear loops are used to hold gear (quickdraws, cams, etc) onto your harness. 4 gear loops is most common.
0 - 1 Gear Loops
Most often on full body harnesses or guide/gym style harnesses.
2-3 Gear Loops
Mostly found on lighter harnesses made for [ski] mountaineering or high-end sport climbing where weight is a high priority.
4 - 5 Gear Loops
The standard/most common number for climbing harnesses. Perfect for sport and trad.
More Than 6 Gear Loops
Designed for long multi-pitch and big wall climbing, found on harnesses made to hold the maximum amount of gear.
Occasionally, the number of gear loops will change on a harness model depending on the size. There could be 7 gear loops for the med/large but only 5 gear loops for the xsmall/small. In this case we list the highest number for the filters, and then write an explanation on the product page like, “Size S/XS can only fit 5 gear loops.”
|4 Gear loops|
|Ice Clip Slots|
Ice Clip Slot
Ice clipper slots are made to fit a carabiner that holds ice screws. These slots are generally only used by ice climbers but there is no disadvantage to having them on your harness.
Less than 40% of harnesses will have ice clipper slots. And those harnesses will usually have 2 or 4 slots, often located next to, or between, the gear loops.
|Belay / Tie-In||One Loop|
|Waist Buckle Type||Quick Adjust|
|Leg Buckle Type||Quick Adjust|
Trad climbers often look for a haul loop as they're intended to haul a rope (second line) or pack (while you climb the chimney).
A haul loop can also hold shoes or other accessories. Although not the intended use, it is also commonly used to hold a chalk bag.
|Size Chart|| |
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.