Collecting every piece of gear takes a little time.
We think it's worth the wait.

Nice choice!
Give us a moment to collect those options for you.

Sterling 9.8mm Evolution Velocity Bicolor Green
  • Sterling 9.8mm Evolution Velocity Bicolor Green
  • Sterling 9.8mm Evolution Velocity Bicolor Black

9.8mm Evolution Velocity 50m Bicolor

Rating

no ratings

Description

Just like the solid Velocity this 9.8mm rope has it all and is our most popular of the Evolution series. Just the right amount of stiffness, so your rope doesn't flop during critical clips and its silky smooth sheath withstands abrasion and slides effortlessly to reduce rope drag.
What makes Sterlings BiColor ropes unique and a leader in industry is the dramatic color change in the middle. Finding the center is easy, quick and accurate, even in low light situations. These ropes have the same construction and award winning performance as their single color namesakes.

Retail price

US$ 216.65

When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!

Award Image
Weight 62.0 g/m
6.834 lbs / 3100 g
Diameter (millimeters) 9.8 mm
Length (meters) 50 m
Rope Type

Type

There are 3 types of dynamic ropes that are used by climbers. They are known as Single, Half (Double), and Twin. The type of rope preferred varies by climbing style, location, and region.


Single

By far, the most common type of rope. Great for indoors and out. In the US, it is the most common sport and big wall and are also used for trad cragging. The handling is simple and the diameter options are quite varied.

Half (Double)

The best cure for a meandering route, only one of the ropes will clip into each piece of protection so a mindful climber can can reduce rope drag considerably. You can also rappel twice the distance, it’s easier to safely protect traverse pitches and there is a smaller chance that both ropes would become damaged (by rockfall, crampons, etc).

Twin

Both ropes must be clipped through each piece of protection. This is the lightest style of (two) ropes. They excel for rappels, going twice the distance vs a single rope, but do not have the ability to mitigate rope drag even though there are two ropes.

It is unlikely both ropes will be damaged at once, and is why many alpine, ice and mixed climbers choose twin and/or half ropes.


Learn More

Every rope type and when to use them
Single  
UIAA Falls (Single / Half / Twin)

UIAA Falls

This refers to the number of UIAA falls a rope has been tested to be able to withstand without breaking. The UIAA fall is a complicated test that is designed to create a uniform standard for strength in ropes, and is not generally reflective of real-world climbing situations. The test involves dropping a weight tied to the rope in such a way that it will see the highest amount of force a real-world situation could generate. The UIAA requires that Single and Half ropes must pass this test without breaking at least 5 times, while twin ropes must withstand 12 falls. In practice, it can likely be concluded that ropes that have higher than this standard number of falls will be stronger and put up with more abuse.


It is important to note that any rope that is UIAA or EN certified is considered safe to climb on, regardless of the number of UIAA falls it is rated for.

6 falls  /  -  /  -
Dynamic Elongation (Single / Half / Twin)

Dynamic Elongation

This refers to the amount of stretch measured during the dynamic testing (or drop test) used when certifying ropes. Higher stretch will absorb more force and result in a softer catch but increases chances of groundfall at the beginning of a climb. The EN and UIAA require a stretch of at least 10% and no more than 40% for dynamic ropes. Single and Half ropes are tested individually and Twin ropes are tested as a pair.

26.4 % /  - /  -
Static Elongation (Single / Half / Twin)

Static Elongation

This refers to the amount of stretch measured during the static test used when certifying ropes. Most climbers will notice the difference in static elongation when climbing in a top rope situation, where higher stretch will make for a springier belay and could result in a ground fall when climbing closer to the ground. The EN and UIAA require a stretch of no more than 10% for Single and Twin ropes and no more than 12% for Half ropes. Single and Half ropes are tested individually and Twin ropes are tested as a pair.

8.6 % /  - /  -
Impact Force (Single / Half / Twin)

Impact Force

Impact force is the amount of force in kN that is measured at the testing mass during the UIAA dynamic drop rope test. When the weight is dropped, the force measured must be at or below 12kN for Single and Twin ropes and 8kN for Half ropes. The real world application of this test is determining that the rope can dissipate and absorb the appropriate amount of force from the fall as it would be felt by the climber. The variables used in the test set a situation that is well beyond anything climbers encounter, and shouldn't be considered realistic to actual climbing situations.


In reality forces of this magnitude would result in severe injury as this test is designed to test the limits of the rope and not the comfort of the climber.

8.80 kN /  - /  -
Dry Treatment

Dry Treatment

When a rope is dry treated, it has had a coating applied to its core fibers, its sheath fibers, or both. The purpose of this coating is to reduce the amount of water the rope can absorb when in wet or icy conditions. Wet ropes are heavier, handle and belay differently, and have been tested to be weaker than dry ropes. Many climbers prefer dry treated ropes for very dusty or dirty environments, as they are more resistant to uptake of dirt and can stay cleaner longer.


Learn More

Benefits of Dry vs Non-Dry ropes
Core only ­
Sheath Proportion (%) ­
Sheath Slippage (mm) ­
Type of Middle Mark Bicolor
Rope End Marker None
Certification CE, EN, UIAA
RFID / NFC Option

RFID and NCF

This technology can be helpful if you are a gym or professional business where you'd like to track the usage and age of your ropes.

RFID is how items are uniquely identified using radio waves (Radio Frequency Identification). It's for 1-way communication from 10cm to 100m away depending on the frequency. Example: Airport Baggage.

NFC is a subset of RFID that is restrained to close proximity communication typically less than 10cm (Near Field Communication). NFC chips can operate a 2-way signal to exchange information. Example: Apple Pay.

None

No reviews yet.

Chicks With Picks Gear Review no rating given just a review

In the fall of 2014, when Kitty Calhoun and I made our gear list for climbing Tangerine Trip, a big-wall aid route on El Cap in Yosemite, it was I who said “I got the lead rope”.  I had been climbing with my 9.8mm Evolution Velocity for a summer and it had proven itself with strength, durability, and handling.  Just what you need when you’re about to head up the biggest piece of rock there is in the lower 48!

Sterling New Ropes 2015

Introducing Sterling new ropes for 2015.

Pro Climber's Choice

Pro climber talks about Sterling ropes, why he chooses 9.4mm Fusion Ion2 and 9.8mm Evolution Velocity.

Sterling Rope Evolution velocity

In this video Joey Kinder talks about 9.8mm Evolution Velocity of Sterling Rope, he explains why he chooses this rope.

Sterling Rope Fusion Nano, Fusion Ion2, Evolution Velocity

In this video Whitney Boland talks about her life, her struggle against a chronic disease and climbing, she explains why she chooses Fusion Nano, Fusion Ion2 and Evolution Velocity ropes.

Sterling Rope Evolution Velocity and Fusion Ion2

Anna and Matteo talks about their life, climbing and Sterling Ropes, they explains why they use Sterling Rope.

Making a Backpack Coil