Collecting every piece of gear takes a little time.
We think it's worth the wait.

Nice choice!
Give us a moment to collect those options for you.

Edelweiss 9.2mm Performance EverDry
  • Edelweiss 9.2mm Performance EverDry
  • Edelweiss 9.2mm Performance EverDry

9.2mm Performance 60m Dry

Rating

no ratings

Description

Being at once single rope, double rope and twin rope, the PERFORMANCE is an hybrid product that synthesizes the extreme needs of experts.

Retail price

US$ 229.99
Weight 52.0 g/m
6.878 lbs / 3120 g
Diameter (millimeters) 9.2 mm
Length (meters) 60 m
Rope Type

Type

There are 3 types of dynamic ropes that are used by climbers. They are known as Single, Half (Double), and Twin. The type of rope preferred varies by climbing style, location, and region.


Single

By far, the most common type of rope. Great for indoors and out. In the US, it is the most common sport and big wall and are also used for trad cragging. The handling is simple and the diameter options are quite varied.

Half (Double)

The best cure for a meandering route, only one of the ropes will clip into each piece of protection so a mindful climber can can reduce rope drag considerably. You can also rappel twice the distance, it’s easier to safely protect traverse pitches and there is a smaller chance that both ropes would become damaged (by rockfall, crampons, etc).

Twin

Both ropes must be clipped through each piece of protection. This is the lightest style of (two) ropes. They excel for rappels, going twice the distance vs a single rope, but do not have the ability to mitigate rope drag even though there are two ropes.

It is unlikely both ropes will be damaged at once, and is why many alpine, ice and mixed climbers choose twin and/or half ropes.


Learn More

Every rope type and when to use them
Single/Half/Twin  
UIAA Falls (Single / Half / Twin)

UIAA Falls

This refers to the number of UIAA falls a rope has been tested to be able to withstand without breaking. The UIAA fall is a complicated test that is designed to create a uniform standard for strength in ropes, and is not generally reflective of real-world climbing situations. The test involves dropping a weight tied to the rope in such a way that it will see the highest amount of force a real-world situation could generate. The UIAA requires that Single and Half ropes must pass this test without breaking at least 5 times, while twin ropes must withstand 12 falls. In practice, it can likely be concluded that ropes that have higher than this standard number of falls will be stronger and put up with more abuse.


It is important to note that any rope that is UIAA or EN certified is considered safe to climb on, regardless of the number of UIAA falls it is rated for.

5 falls  / 20 falls  / 25 falls
Dynamic Elongation (Single / Half / Twin)

Dynamic Elongation

This refers to the amount of stretch measured during the dynamic testing (or drop test) used when certifying ropes. Higher stretch will absorb more force and result in a softer catch but increases chances of groundfall at the beginning of a climb. The EN and UIAA require a stretch of at least 10% and no more than 40% for dynamic ropes. Single and Half ropes are tested individually and Twin ropes are tested as a pair.

37.0 % /  32.0 % /  29.0 %
Static Elongation (Single / Half / Twin)

Static Elongation

This refers to the amount of stretch measured during the static test used when certifying ropes. Most climbers will notice the difference in static elongation when climbing in a top rope situation, where higher stretch will make for a springier belay and could result in a ground fall when climbing closer to the ground. The EN and UIAA require a stretch of no more than 10% for Single and Twin ropes and no more than 12% for Half ropes. Single and Half ropes are tested individually and Twin ropes are tested as a pair.

8.0 % /  8.0 % /  7.0 %
Impact Force (Single / Half / Twin)

Impact Force

Impact force is the amount of force in kN that is measured at the testing mass during the UIAA dynamic drop rope test. When the weight is dropped, the force measured must be at or below 12kN for Single and Twin ropes and 8kN for Half ropes. The real world application of this test is determining that the rope can dissipate and absorb the appropriate amount of force from the fall as it would be felt by the climber. The variables used in the test set a situation that is well beyond anything climbers encounter, and shouldn't be considered realistic to actual climbing situations.


In reality forces of this magnitude would result in severe injury as this test is designed to test the limits of the rope and not the comfort of the climber.

8.20 kN /  6.00 kN /  9.50 kN
Dry Treatment

Dry Treatment

When a rope is dry treated, it has had a coating applied to its core fibers, its sheath fibers, or both. The purpose of this coating is to reduce the amount of water the rope can absorb when in wet or icy conditions. Wet ropes are heavier, handle and belay differently, and have been tested to be weaker than dry ropes. Many climbers prefer dry treated ropes for very dusty or dirty environments, as they are more resistant to uptake of dirt and can stay cleaner longer.


Learn More

Benefits of Dry vs Non-Dry ropes
Sheath only  (aka Everdry)
Sheath Proportion (%) ­
Sheath Slippage (mm) 0 mm
Type of Middle Mark Marking
Rope End Marker None
Certification CE, EN, UIAA
RFID / NFC Option

RFID and NCF

This technology can be helpful if you are a gym or professional business where you'd like to track the usage and age of your ropes.

RFID is how items are uniquely identified using radio waves (Radio Frequency Identification). It's for 1-way communication from 10cm to 100m away depending on the frequency. Example: Airport Baggage.

NFC is a subset of RFID that is restrained to close proximity communication typically less than 10cm (Near Field Communication). NFC chips can operate a 2-way signal to exchange information. Example: Apple Pay.

None

No reviews yet.

UK Climbing Gear Review no rating given just a review

A really good, well handling, durable rope. Not the softest feeling rope out there, but nice to use and hard wearing for a 9.2mm. Light enough (just) to use as a half rope, but better as a skinny single rope for sport or trad. A good buy if you predominantly want a single rope, but might need a half rope occasionally.

Rock and Ice Gear Review

I tested this rope on routes both trad and sport, long and short. The 9.2mm is a hair too slim to work comfortably with a Grigri (try the new Fader’s SUM, reviewed above), especially for sport-wanking dog-a-thons, but is a godsend for trad climbing. I took this rope up on Idyllwild, California’s, The Vampire (5.11a). This daunting line, with its route-finding nebulousness, holdless traverses and long runouts, demands a light, smooth-feeding cord. The Performance was just that, and, when used with an ATC-style device, felt plenty beefy in the belayer’s hands. On single-pitch routes, such as the grainy, punishing cracks of Joshua Tree, the rope excelled as well, clipping quickly and smoothly into gear, and feeling light and nimble in my quivering mitts. Thus, it would also make for a good sport-climbing redpoint cord, especially suited to long, rope-stretching pitches.

Alpinist Gear Review rating 4/5

After more than twenty months of climbing with Edelweiss Performances, I feel pretty qualified in my judgment of the rope. The Performance works well on ice, but not as great as twins. Sport cragging with it is fine. (One should be aware of its elasticity and GriGri crazed partners may be confused by its diameter.) Where this rope really stands out is on alpine rock. When a single rope is required, and the approach cannot be done in sandals, the Edelweiss Performance is my choice. It's light on the back, small in the pack, and in my experience an actual lifesaver when carried as a ""just in case"" measure.
Pros: Light, Thin,
Cons: No Middle Mark, Cost, Squirrelly

Making a Backpack Coil