A pictoral representation of UIAA-101 and EN-892 standards for ropes.
8.9mm Master 50m 2xDry
An exceptional universal single, half and twin rope in one, with a low weight and the Complete Shield finish will arouse enthusiasm in you and will become an exquisite partner to the most exacting of you. A complete double impregnation increases its life span and its resistance to moisture, abrasion and penetration of impurities into the rope. Due to the very good handling properties of the rope and the minimum friction in progression belaying, the rope will be your ideal ally in climbing long sport routes. You will surely appreciate its qualities also in a combined mountain terrain of rocks, ice and glaciers.
|Weight|| 52.0 g/m|
5.732 lbs / 2600 g
|Diameter (millimeters)||8.9 mm|
|Length (meters)||50 m|
|UIAA Falls (Single / Half / Twin)||5 / 16 / 29|
|Dynamic Elongation (Single / Half / Twin)||33.0 % / 30.0 % / 27.0 %|
|Static Elongation (Single / Half / Twin)||6.9 % / 6.9 % / 6.9 %|
|Impact Force (Single / Half / Twin)||8.70 kN / 6.10 kN / 9.60 kN|
|Dry Treatment||Sheath & Core|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)||0 mm|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.