A pictoral representation of UIAA-101 and EN-892 standards for ropes.
10.2mm So Tough 50m 2xDry
When the going gets tough, the So Tough won't be going! This 10.2 mm single rope is as tough as they come. Thanks to its Complete Impregnation, water, dirt and abrasion stand no chance. in addition, the rope ends are tightly braided and sealed with our Complete Technology. Looking for a robust and high-quality rope that can take plenty of punishment at the wall, the crag or for alpine cliffs? Our recommendation, “When it looks tough, you need the So Tough!”
|Weight|| 67.0 g/m|
7.385 lbs / 3350 g
|Diameter (millimeters)||10.2 mm|
|Length (meters)||50 m|
|UIAA Falls (Single / Half / Twin)||13 / 00|
|Dynamic Elongation (Single / Half / Twin)||36.0 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||6.1 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||7.10 kN / 0.00 kN / 0.00 kN|
|Dry Treatment||Sheath & Core|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)|||
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.