A pictoral representation of UIAA-101 and EN-892 standards for ropes.
8.9mm Edge 80m Dry
This rope has two key features: it's fluid and lightweight. Complies with 3 dynamic rope standards:single, half and twin.
Test rope's effectiveness in belaying device before climbing.
Deterioration of rope ends is no longer an issue thanks to this new ultrasound fusion process.
Main fabric : 100.0% Polyamide (PA).
|Weight|| 54.0 g/m|
9.523 lbs / 4320 g
|Diameter (millimeters)||8.9 mm|
|Length (meters)||80 m|
|UIAA Falls (Single / Half / Twin)||5 / 15 / 37|
|Dynamic Elongation (Single / Half / Twin)||36.0 % / 32.3 % / 28.0 %|
|Static Elongation (Single / Half / Twin)||9.2 % / 9.2 % / 5.4 %|
|Impact Force (Single / Half / Twin)||7.80 kN / 5.90 kN / 9.00 kN|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)||0 mm|
|Rope End Marker||None|
|Certification||CE, EN, UIAA|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.