A pictoral representation of UIAA-101 and EN-892 standards for ropes.
The 10.2mm Outdoor Rope 50m is officially retired.You've found a page of history! The 10.2mm Outdoor Rope 50m is no longer produced by Simond and it is not available to buy from major online retailers. You can still check out all the specs and claim your ownership.
10.2mm Outdoor Rope 50m
This rope is 10.2 mm in diameter enabling you to safely belay with all belaying devices available on the market.
Perfect for single length cliffs, make sure to choose the right length.
Sheath with long life treatment, makes it more durable in contact with rock face.
Suitable for all belaying devices on the market, making belaying safer.
Main fabric : 100.0% Polyamide 6 (PA6).
|Weight|| 65.0 g/m|
7.165 lbs / 3250 g
|Diameter (millimeters)||10.2 mm|
|Length (meters)||50 m|
|UIAA Falls (Single / Half / Twin)||6 / 00|
|Dynamic Elongation (Single / Half / Twin)||30.8 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||9.0 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||9.00 kN / 0.00 kN / 0.00 kN|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)|||
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.