A pictoral representation of UIAA-101 and EN-892 standards for ropes.
10mm Shogun 50m
All-round rope with great technical parameters and unique handling.
The rope is destined to be used on rocks, and also on the climbing wall. Technical features make it possible for the rope to be used also on multi-pitches and bigwalls.
|Weight|| 65.0 g/m|
7.165 lbs / 3250 g
|Diameter (millimeters)||10.0 mm|
|Length (meters)||50 m|
|UIAA Falls (Single / Half / Twin)||9 / 00|
|Dynamic Elongation (Single / Half / Twin)||33.0 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||7.1 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||7.20 kN / 0.00 kN / 0.00 kN|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)|||
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.