A pictoral representation of UIAA-101 and EN-892 standards for ropes.
The 10.2mm Rock Up 200m is officially retired.You've found a page of history! The 10.2mm Rock Up 200m is no longer produced by Millet and it is not available to buy from major online retailers. You can still check out all the specs and claim your ownership.
10.2mm Rock Up 200m
The LOW IMPACT programme applied to the ROCK UP family is about simplicity: it eliminates treatment, drying and machine transfers.
Fewer temperature rises = respect for the yarn + energy savings
For all kinds of climbing!
The classic diameter for sampling the discipline, while also ensuring good rope longevity.
Eco-friendly production: dry rope with advanced technical characteristics.
|Weight|| 65.0 g/m|
28.660 lbs / 13000 g
|Diameter (millimeters)||10.2 mm|
|Length (meters)||200 m|
|UIAA Falls (Single / Half / Twin)||7 / - / -|
|Dynamic Elongation (Single / Half / Twin)||38.0 % / - / -|
|Static Elongation (Single / Half / Twin)||-|
|Impact Force (Single / Half / Twin)||8.30 kN / - / -|
|Sheath Proportion (%)|||
|Sheath Slippage (mm)|||
|Rope End Marker||None|
|Certification||CE, EN, UIAA|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.