Collecting every piece of gear takes a little time.
We think it's worth the wait.

Nice choice!
Give us a moment to collect those options for you.

 The 9.9mm Apex 70m 2xDry is officially retired.You've found a page of history! The 9.9mm Apex 70m 2xDry is no longer produced by Maxim/New England and it is not available to buy from major online retailers. You can still check out all the specs and claim your ownership.

Maxim 9.9mm Apex 70m Dry

9.9mm Apex 70m 2xDry

Maxim/New England

Rating

no ratings

Description

Our Apex series ropes are designed to provide optimum life safety while permitting the climber to push past his or her personal limits. Apex offers excellent durability with extreme fall protection. Designed to be pushed everyday, Apex ropes provide the long life and safety assurance you have come to expect from MAXIM Dynamic Ropes.

Retail price

US$ 237.00
Weight 63.0 g/m
9.722 lbs / 4410 g
Diameter (millimeters) 9.9 mm
Length (meters) 70 m
Rope Type Single­
UIAA Falls (Single / Half / Twin) ­7  / 00
Dynamic Elongation (Single / Half / Twin) 29.0 % / 0.0 % / 0.0 %
Static Elongation (Single / Half / Twin) 5.0 % / 0.0 % / 0.0 %
Impact Force (Single / Half / Twin) 9.50 kN / 0.00 kN / 0.00 kN
Dry Treatment Sheath & Core­
Sheath Proportion (%) ­
Sheath Slippage (mm) 0 mm
Rope End Marker None
Certification ­
None
Making a Backpack Coil

No reviews yet.

DPM Climbing Gear Review no rating given just a review

No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.