A pictoral representation of UIAA-101 and EN-892 standards for ropes.
8.9mm Swift Pro Bipattern 70m 2xDry
Our tried-and-tested Swift construction, now with ColorTec technology. The middle of the rope is clearly marked by a distinctive color and pattern change.
Via ColorTec braiding technology the climbing rope changes its design completely in middle point of the rope.
Minimal weight and diameter, excellent handling.
Pro Dry for outstanding dirt and water resistance.
Thermo Shield treatment for perfect handling.
Not suitable for working routes or top roping.
|Weight|| 52.0 g/m|
8.025 lbs / 3640 g
|Diameter (millimeters)||8.9 mm|
|Length (meters)||70 m|
|UIAA Falls (Single / Half / Twin)||5 / 22 / 22|
|Dynamic Elongation (Single / Half / Twin)||33.0 % / 33.0 % / 33.0 %|
|Static Elongation (Single / Half / Twin)||9.0 % / 9.0 % / 9.0 %|
|Impact Force (Single / Half / Twin)||8.80 kN / 6.70 kN / 10.40 kN|
|Dry Treatment||Sheath & Core|
|Sheath Proportion (%)||34.0 %|
|Sheath Slippage (mm)||0 mm|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.