A pictoral representation of UIAA-101 and EN-892 standards for ropes.
11.0mm Enduro 60m
The hard wearing Enduro has been completely redesigned. If you need a tough rope with great specs, this is it! A UIAA fall rating of 15 falls with a weight of only 77 grams per meter makes this the perfect rope for big walls, guiding, programs or other classes.
If you can’t see any buying options above, try turning off all ad-blocking plugins.
|Weight|| 77.0 g/m|
10.190 lbs / 4620 g
|Diameter (millimeters)||11.0 mm|
|Length (meters)||60 m|
|UIAA Falls (Single / Half / Twin)||15 / 00|
|Dynamic Elongation (Single / Half / Twin)||33.4 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||9.1 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||8.50 kN / 0.00 kN / 0.00 kN|
|Sheath Proportion (%)||40.0 %|
|Sheath Slippage (mm)||4 mm|
|Rope End Marker||None|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.