A pictoral representation of UIAA-101 and EN-892 standards for ropes.
9.4mm Stinger 80m 2xDry
Designed for high-level climbers, this is the single rope preferred for very hard routes. STRONG POINTS: • An incredible number of falls for its weight and so smooth running that it results in an appreciable increase in energy when clipping. USES: High grade climbers.
|Weight|| 59.0 g/m|
10.405 lbs / 4720 g
|Diameter (millimeters)||9.4 mm|
|Length (meters)||80 m|
|UIAA Falls (Single / Half / Twin)||6 / 00|
|Dynamic Elongation (Single / Half / Twin)||- / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||- / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||8.20 kN / 0.00 kN / 0.00 kN|
|Dry Treatment||Sheath & Core (aka Golden Dry)|
|Sheath Proportion (%)||38.0 %|
|Sheath Slippage (mm)||0 mm|
|Rope End Marker||Yes|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.